(§) Loading and Unloading Film
Loading Film
1
2
Orange mark
Open the camera back.
• Slide the camera back lever down as
shown by the arrow.
Insert the film cartridge at an
angle as shown in the illustration.
• Set the Command Dial to any setting
except <(iI3a>.
Pull the edge of the film leader to
the orange mark on the camera.
• Hold down the film cartridge while
pulling out the film leader.
• If the edge of the film leader goes
beyond the orange mark, rewind
some of the film back into the
cartridge.
Wrong
Close the camera back.
' After checking that the film leader
edge is correctly aligned with the
orange mark, close the camera back.
• The film will advance to frame 1
automatically.
■ When the initial film advance ends,
the <@> icon and frame counter of
“ I" are displayed on the LCD panel.
23
Comments to this Manuals