Canon EOS 80D User Manual download pdf (Page 62)

To start with, check if the access point supports WPS* that allows easy

connection between Wi-Fi devices.

If you do not know if the access point you use is WPS-compatible, refer

to the access point instruction manual or other documentation.

* Wi-Fi Protected Setup

 When WPS is supported

The following two connection methods are available. Connection

can be established easier with WPS (PBC mode).

• Connecting via WPS (PBC mode): Perform the operations

described on page 63.

• Connecting via WPS (PIN mode): Perform the operations

described on page 67.

 When WPS is not supported

• Connecting to a detected network manually: Perform the

operations described on page 71.

Access Point Encryption

This camera supports the following options for [Authentication] and

[Encryption settings]. Therefore, when connecting to a detected

network manually, the encryption used by the access point must be one

of the following.

 [Authentication]: Open system, Shared key, or WPA/WPA2-PSK

 [Encryption settings]: WEP, TKIP, or AES

Checking the Type of Access Point

 If stealth functions of the access point are active, connection may

be disabled. Deactivate stealth functions.

 When connecting to a network that has a network administrator, ask the

administrator about the detailed setting procedures.

If the network you use filters by MAC address, register the MAC address of

the camera at the access point. The MAC address can be checked on the

[View info] screen (p.142).

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 173 174

No comments

Canon EOS 80D User Manual Page 62