[Use AirPrint]
Select the check bo
x to enable AirPrint. To disable AirPrint, clear the check box.
[Printer Name]
Enter the name of the machine. If an mDNS name has already been registered in [mDNS Settings] (
Conguring DNS(P
. 65) ), the registered name is displayed.
[Location]
Enter the location of the machine. If a location has already been registered in [Device Information Settings]
([Device Management] in [Management Settings] (Settings/Registration)), the registered name is displayed.
[Latitude]
Enter the latitude of the location where the machine is installed.
[Longitude]
Enter the longitude of the location where the machine is installed.
6
Click [OK].
If you select [Use AirPrint], the following settings in <Network> are set to <On>.
● Use HT
TP
● IPP Print Settings
● IPv4 Use mDNS
● IPv6 Use mDNS
● If you change [Printer Name] that you have once specied, you may be unable to print any mor
e from the
Mac that has been able to be used for printing so far. This phenomenon occurs because <mDNS Name> (
Conguring DNS
(P. 65) ) of IPv4 is also changed automatically. In this case, add the machine to the Mac
again.
● Entering the printer name makes it easier to identify multiple printers that support AirPrint.
◼ Changing the Setting of Functions Available with AirPrint
If you want to disable functions that you ar
e not going to use with AirPrint or encrypt communications, congure the
necessary setting using the operation panel.
Linking with Mobile Devices
207
Comments to this Manuals