Canon MP390 User Manual download pdf (Page 3)

Install the print head.

Connect the power cord.

1 Connect the power cord.

q Connect one end of the power cord to the

rear of the machine.

w Connect the other end to the AC outlet.

If the message <PUT IN CARTRIDGE> appears,

go to procedure 4, "Install the print head."

Lift the scan unit.

Touch only the lock lever!

Raise this securely.

Remove the protective

cap and discard it.

Do not touch!

Snap

Slowly lower the lock lever until you hear

a “snap” sound and it locks into place.

Approx. 15 seconds

If the paper output tray does not open, press

the Open button to open the paper output tray.

Click

NOTE

If you open the scan unit while the machine is turned ON, the paper output tray will open.

q Open the inner cover.

w The print head holder moves to the center.

Install the print head here.

5 Insert the print head. 6 Lower the lock lever.

3 Raise the lock lever. 4 Prepare the print head.

1 Lift the scan unit until it locks into place.

If there is a protective sheet, remove the

protective sheet.

2 Open the inner cover.

1 2 3 4 5 6 7 8

No comments

Canon MP390 User Manual Page 3