Canon PIXMA MG7140 User Manual

MG7100 seriesOnline ManualPrintingCopying English

7. Complete the setupClick OK.When you execute print, the document is printed with settings that match yourpurpose.Important When you select the Alway

How to Open the Printer Driver Setup WindowYou can display the printer driver setup window from the application software in use or fromthe printer ico

Important Opening the printer driver setup window through Printer properties (Windows8, Windows 7) or Properties (Windows Vista, Windows XP) displays

Canon IJ Status MonitorIf you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJXPS Status Monitor"

In such cases, take the appropriate action as described.105

Main tab DescriptionThe Main tab allows you to create a basic print setup in accordance with the media type.Unless special printing is required, norma

HighGives priority to print quality over printing speed.StandardPrints with average speed and quality.DraftThis setting is appropriate for test printi

Set... is enabled and you can open the Color Adjustment tab and Matching tab of theManual Color Adjustment dialog box to specify the desired settings.

from -50 to 50.This adjustment changes the relative amount of ink of each color used, whichalters the total color balance of the document. Use your ap

Print preferences... becomes enabled, the Pattern Print dialog box opens, anda pattern can be set.Pattern Print preferences...The Pattern Print dialog

LargeCyan/Magenta/Yellow 19Intensity/Contrast 25SmallCyan/Magenta/Yellow 7Intensity/Contrast 9Note Largest and Large cannot be selected when certain p

Setting the Media Type with the Printer DriverWhen you use this machine, selecting a media type that matches the print purpose will helpyou achieve th

Note In the XPS printer driver, ICM has become ICC Profile Matching.Input ProfileSpecifies the input profile to be used when you select ICM (ICC Profi

Note In the XPS printer driver, ICM has become ICC Profile Matching.Important If the application software is set so that ICM is disabled, ICM is unava

Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) Specifying Color Correction Adjusting Colors with the Printer Driver Printing wit

Maintenance tab DescriptionThe Maintenance tab allows you to perform machine maintenance or change the settingsof the machine. CleaningPerforms print

Selects the ink group that you want to clean the print head for.Click Initial Check Items to display the items that you need to check before youexecut

This dialog box allows you to check the printed pattern and adjust the print headposition.Preview WindowDisplays the pattern of Print Head Alignment,

CleaningPerforms print head cleaning.Print head cleaning removes any blockage in the print head nozzles.Perform cleaning when printing becomes faint,

Auto PowerOpens the Auto Power Settings dialog box.Specify settings for operating the machine power automatically. Perform this function if youwant t

Do not use quiet modeSelect this option when you wish to use the machine with volume of normaloperating noise.Always use quiet modeSelect this option

Important If you leave this check box unchecked, the printer may print to the disc trayeven if a printable disc is not loaded on the disc tray. Theref

Various Printing Methods Setting a Page Size and Orientation Setting the Number of Copies and Printing Order Setting the Stapling Margin Execute Borde

Ink Drying Wait TimeThe machine can pause before printing a subsequent page. Moving the slider to theright increases the pause time, and moving the sl

Features Cleaning the Print Heads from Your Computer Aligning the Print Head Position from Your Computer Use Your Computer to Print a Nozzle Check Pat

Canon IJ Preview DescriptionCanon IJ Preview is an application software that displays what the print result will look likebefore a document is actuall

Page MenuThis menu includes the following commands to select page to be displayed.All of these commands except Select Page can also be selected from t

50%Reduces the displayed data to 50% of the actual size to be printed.100%Displays the data at the actual size to be printed.200%Enlarges the displaye

Page LayoutDisplays the page layout of the document to be printed.Important If the media type and paper source are set from the application software,

Canon IJ XPS Preview DescriptionCanon IJ XPS Preview is an application software that displays what the print result will looklike before a document is

Print All DocumentsPrints all documents in the document list and closes the Canon IJ XPS Preview.Save Print HistorySwitches whether the documents prin

The combined documents are separated, and the original documents are restored.This command has the same function as the (Reset Documents) on the tool

Duplex Printing...Opens the Duplex Printing dialog box.This dialog box allows you to set Duplex Printing, Automatic, Stapling Side, andMargin.Copies..

Setting a Page Size and OrientationThe paper size and orientation are essentially determined by the application software.When the page size and orient

View MenuSelects the documents and pages to be displayed.DocumentsUse the following command to select the document to display.First DocumentDisplays t

Last PageDisplays the last page of the document.If the currently displayed page is the last page, this command is grayed out andcannot be selected.Pag

View Print Settings AreaDisplays the print settings area at the right side of the preview window.View Deleted PagesWhen the thumbnails are displayed,

Move DocumentUse the following command to change the order of the documents selected in the documentlist.(Move to First)Moves the selected print docum

Important The number displayed in Pages and the output page count are different. To check the output page count, check the status bar at the bottom of

Cyan/Magenta/YellowAdjusts the strengths of Cyan, Magenta, and Yellow.Moving the slider to the right makes a color stronger, and moving the slider to

DefaultsRestores all the settings you have changed to their default values.Clicking this button restores all the settings on this tab to their default

Canon IJ Status Monitor DescriptionThe Canon IJ Status Monitor displays the status of the machine and the printing progress.The monitor uses graphics,

Ink TankCanon IJ Status Monitor shows an icon when a low ink warning or a no ink error occurs.In addition, this function displays graphics showing the

check box.To display the guide messages again, click Envelope Printing on the DisplayGuide Message in the Option menu and enable this setting.Hagaki P

Note If Normal-size is selected for Page Layout, then Automatically reduce largedocument that the printer cannot output is displayed.Normally, you can

Help MenuWhen you select this menu item, the Help window for Canon IJ Status Monitor isdisplayed, and you can check the version and copyright informat

Updating the MP Drivers Obtaining the Latest MP Drivers Deleting the Unnecessary MP Drivers Before Installing the MP Drivers Installing the MP Drivers

Obtaining the Latest MP DriversThe MP Drivers include a printer driver and ScanGear (scanner driver).By updating the MP Drivers to the latest version

Deleting the Unnecessary MP DriversThe MP Drivers which you no longer use can be deleted.When deleting the MP Drivers, first exit all programs that ar

Important Printer driver, XPS printer driver, and ScanGear (scanner driver) will be deleted whenyou uninstall the MP Drivers.177

Before Installing the MP DriversThis section describes the items that you should check before installing the MP Drivers.You should also refer to this

Installing the MP DriversYou can access our web site through the Internet and download the latest MP Drivers andXPS printer driver for your model.The

Related Topics Obtaining the Latest MP Drivers Deleting the Unnecessary MP Drivers Before Installing the MP Drivers180

Printing Using the Operation Panel of the MachinePrinting Photo DataUsing the Slide Show FunctionPrinting Template Forms Such As Lined Paper or Graph

Printing Photo DataPrinting Photographs Saved on a Memory CardAbout Advanced photo MenuPrinting Photo with TrimmingSetting ItemsUsing Useful Display F

Setting the Number of Copies and Printing OrderThe procedure for specifying the number of copies and printing order is as follows:You can also set the

Printing Photographs Saved on a Memory CardYou can print the photograph saved on the memory card easily.This section describes the procedure to print

A. Total number of copiesTotal number of copies is displayed.When tapping, the Check total no. of copies screen is displayed and you can check thenumb

For details:Using Useful Display FunctionsD.SettingsTap to display the Settings screen.You can change the settings of page size, media type, and print

For details on the display method:Using Useful Display Functions6.Touch the Color button.The machine starts printing.Note• Touch the Stop button to ca

• While processing the print job, the photo in other group is not selected.• If you touch the Stop button while processing the print job, the screen t

About Advanced photo MenuThe following menus are selectable in the Advanced print menu to print photos saved on the memory card.Trimming print You ca

Printing Photo with TrimmingYou can edit photo displayed on the touch screen by trimming them and print.1. Make sure that the machine is turned on.2.

A. Tap to switch the aspect ratio of the trimming frame.B.Drag to position the trimming frame.C.Drag to set the trimming frame size.D.Tap to finalize

Setting ItemsYou can specify the setting of page size, media type, photo fix and so on to print the photos saved on thememory card.Print Settings Scre

Note• Depending on the print menu, some setting items cannot be selected. This section describes thesetting items in Photo.The setting item which cann

• Print from Last Page: /Collate: • Print from Last Page: /Collate: 4. Complete the setupClick OK.When you execute print, the specified number of

Note• The shooting date is printed according to the settings of Date display format in Device usersettings under Device settings under Setup.Device us

Using Useful Display FunctionsYou can display the multiple photos at once, specify the date (last modified date of data) to select photos,and switch t

The photos on date specified are displayed.Note• The date is displayed according to the settings of Date display format in Device user settingsunder D

Using the Slide Show FunctionPrinting Photo While Viewing the Slide Show196

Printing Photo While Viewing the Slide ShowYou can view the photos saved on the memory card with the slide show.In the slide show, the photos are disp

When starting printing, load paper, then touch the Color button.Note• You can change the print settings by tapping Print settings.Setting Items• To re

Printing Template Forms Such As Lined Paper or Graph PaperYou can print a template form such as lined paper, graph paper, or checklist, etc. on A4, B5

• Staff paperYou can print staff paper with 10 or 12 staves.Setting on the touch screen:◦ Staff paper 1 (10 staves)◦ Staff paper 2 (12 staves)• Handwr

4. Tap Template print.5. Tap the template you want to print.Printable template forms6. Specify the settings as necessary.1. CopiesSpecify the number o

Printing Documents (PDF File) Saved on a Memory CardYou can print PDF files scanned using the operation panel of the machine or made using Canon IJ Sc

These settings can be used in combination with Normal-size, Borderless, Fit-to-Page,Scaled, Page Layout, and Duplex Printing.17

• If no printable document (PDF files) is saved on the memory card, Data of supported types arenot saved. is displayed on the touch screen.6. Select t

7. Specify the settings as necessary.1.CopiesSpecify the number of copies.2.Page sizeSelect the page size depending on the loaded paper.3. Type (Media

About Disc Label PrintingCopying the Label Side of DiscPrinting Photo from a Memory Card onto the Disc Label205

Printing Photos in Online Photo AlbumYou can access the internet photo sharing site using the operation panel of the machine and print the photoin onl

For details on the operating of Cloud menu after the firmware update:Use the Machine's Cloud Function4. Tap the photo sharing site to use.The mac

Tap near the center of the displayed photo to display menus.A.Total number of copiesTotal number of copies is displayed.When tapping, the Check total

night scene, person, etc. and corrects each scene with the most suitable color, brightness,or contrasts automatically to print.Depending on the type o

Downloading and Printing Template FormsYou can download the template form you want to print from the web service.Before using the web service, see the

9. Touch the Color button.The machine starts printing.220

Settings for Web ServiceThis section describes the machine's settings for web service.Registering the Account on Photo Sharing SiteResetting the

Setting the Stapling MarginThe procedure for setting the staple side and the margin width is as follows:1. Open the printer driver setup window2. Spec

8. When the confirmation screen for account management is displayed, tap Agree.Note• By tapping Privacy Policy, you can display the message for accoun

Note• Depending on the setting on the photo sharing site, entering the password may not benecessary.14. Tap Connect.The machine accesses on the photo

Printing from a Digital CameraPrinting Photographs Directly from a PictBridge (Wireless LAN) Compliant DeviceAbout PictBridge (Wireless LAN) Print Set

Printing Photographs Directly from a PictBridge (Wireless LAN)Compliant DeviceYou can connect a PictBridge (Wireless LAN) compliant device such as a d

4. Specify the print settings such as the paper type and layout.You can perform settings using the menu on the LCD of your PictBridge (Wireless LAN) c

About PictBridge (Wireless LAN) Print SettingsSettings on a PictBridge (Wireless LAN) Compliant DeviceSettings on the MachineSettings on a PictBridge

*3 Printed in 35 mm Film Style Layout (Contact Printing Layout). Available only with a Canon-brandPictBridge (Wireless LAN) compliant device. (May not

Printing with the Access Point ModeWhen the machine enters the access point mode, you can print from an external device such as a computeror a smartph

Note• For details on how to print from an external device such as a computer or a smartphone viawireless LAN, refer to the device's or applicatio

CopyingMaking Copies BasicDisplaying the Preview ScreenSetting ItemsReducing or Enlarging a CopyTwo-Sided CopyingAbout Special Copy MenuCopying Two P

Note The printer automatically reduces the print area depending on the stapleposition margin.4. Complete the setupClick OK on the Page Setup tab.When

Making CopiesLoad the original on the platen glass to copy.This section describes the procedure to copy with Copy.1. Make sure that the machine is tur

C. Tap to display the print setting items.For details on the setting items:Setting ItemsD.Tap to preview an image of the printout on the preview scree

Adding the Copying Job (Reserve copy)You can add the copying job while printing (Reserve copy).The screen below is displayed when you can add the copy

Displaying the Preview ScreenWhen is displayed on the Copy standby screen, tapping allows you to preview an image of theprintout on the preview sc

Setting ItemsYou can change the copy settings such as magnification and intensity.Print Settings ScreenHow to display the print setting screen varies

Note• Depending on the copy menu, some setting items cannot be selected. This section describes thesetting items in Copy.The setting item which cannot

Adjust print quality according to the original.Important• If you use Draft with Type set to Plain paper and the quality is not as good as expected, se

Reducing or Enlarging a CopyYou can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.The screen below is

• Preset ratioYou can select one of the preset ratios to reduce or enlarge copies.Select the appropriate ratio for size of original and page size.The

Two-Sided CopyingWhen you select 2-sided for 2-sidedPrintSetting in Copy, you can copy two original pages onto the bothsides of a single sheet of pape

ContentsPrinting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Printing from a C

Execute Borderless PrintingThe borderless printing function allows you to print data without any margin by enlarging thedata so that it extends slight

• If you are copying in black & white, print intensity of the Two-sided copy may differ from that of a single-sided copy.When checking the orienta

About Special Copy MenuThe following menus are selectable in the Advanced print menu to copy originals.Borderless copy You can copy images so that th

Copying Two Pages to Fit onto a Single PageWhen you select 2-on-1 copy for Layout in Copy, you can copy two original pages onto a single sheet ofpaper

If you use this function in combination, select 2-sided for 2-sidedPrintSetting, then select theorientation and the stapling side of print paper on th

• If you use this function in combination with Two-sided copy, the screen above is displayed afterscanning the second sheet of original is complete. F

Copying Four Pages to Fit onto a Single PageWhen you select 4-on-1 copy for Layout in Copy, you can copy four original pages onto a single sheet ofpap

After selecting the order, you can select whether you use the preview screen. If you tap ON, the previewscreen is displayed so that you can check the

Remove the sheet of original from the platen glass after scanning and load the next sheet on theplaten glass, then tap Scan.B. Tap to start copying th

Copying Thick Originals Such as BooksWhen copying thick originals such as books, you can make a copy without black margins around the imageand gutter

Copying without BordersYou can copy images on photo paper so that they fill the entire page without borders.1.Make sure that the machine is turned on.

Click OK when the confirmation message appears.When a message prompting you to change the media type appears, select a mediatype from the list and cli

Copying PhotosYou can scan printed photos and print them all at one time.1. Make sure that the machine is turned on.2. Load the photo paper.3.Flick th

Select the page size of the loaded paper.3. Type (Media type)Select the media type of the loaded paper.4. Print qlty (Print quality)Select print quali

Note When Plain Paper is selected for Media Type on the Main tab, borderless printing isnot recommended. Therefore, the message for media selection ap

Fit-to-Page PrintingThe procedure for printing a document that is automatically enlarged or reduced to fit thepage size to be used is as follows:1. Op

reduced. When the Printer Paper Size is larger than the Page Size, the page imagewill be enlarged.The current settings are displayed in the settings p

Scaled PrintingThe procedure for printing a document with pages enlarged or reduced is as follows:1. Open the printer driver setup window2. Set scaled

When the printer paper size is smaller than the Page Size, the page image will bereduced. When the printer paper size is larger than the Page Size, th

Click OK.When you execute print, the document will be printed with the specified scale.Important When the application software which you used to creat

Tiling/Poster PrintingThe tiling/poster printing function allows you to enlarge image data, divide it into severalpages, and print these pages on sepa

Select the size of the paper loaded in the machine from the Printer Paper Size list.This completes the setup for dividing the document into 2 and perf

Adjusting Contrast. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94Adjusting In

5. Complete the setupClick OK on the Page Setup tab.When you execute print, the document will be divided into several pages duringprinting.Printing On

Important Since tiling/poster printing enlarges the document when printing it, the print resultsmay become coarse.33

Booklet PrintingThe booklet printing function allows you to print data for a booklet. Data is printed on bothsides of the paper. This type of printing

Click Specify... and specify the following settings in the Booklet Printing dialog box,and then click OK.Margin for staplingSelect which side should t

Duplex PrintingThe procedure for printing data on both sides of a sheet of paper is as follows:You can also set duplex printing in Additional Features

When you perform duplex printing, the print area of the document becomes slightlynarrower than usual and the document may not fit on one page.Click Pr

3. Select the layoutSelect Normal-size, Fit-to-Page, Scaled, or Page Layout from the Page Layoutlist.4. Specify the side to be stapledThe best Staplin

• Letter 8.5"x11" 22x28cm, A5, A4, B5, Hagaki 100x148mm After printing the front page, there is an ink drying wait time before starting to p

Stamp/Background PrintingStamp or Background may be unavailable when certain printer drivers or operatingenvironments are used.The Stamp function allo

Note With the XPS printer driver, the Stamp/Background... button has become theStamp... button and only the stamp function can be used.3. Select a sta

Using Web Service Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212Notice for Web Service Pr

5. Complete the setupClick OK on the Page Setup tab.When you execute print, the data is printed with the specified stamp.Printing a BackgroundTwo bitm

Related Topics Registering a Stamp Registering Image Data to be Used as a Background43

Registering a StampThis feature may be unavailable when certain printer drivers or operating environments areused.You can create and register a new st

Note With the XPS printer driver, the Stamp/Background... button has become theStamp... button and only the stamp function can be used.3. Click Define

Important Stamp Text appears grayed out and is unavailable when Date/Time/UserName is selected.• Placement tabSelect the stamp position from the Posit

Click Save overwrite on the Save settings tab.When you want to save the stamp with a different title, type a new title in the Titlebox and click Save.

Registering Image Data to be Used as a BackgroundThis feature may be unavailable when certain printer drivers or operating environments areused.You ca

Note With the XPS printer driver, the Stamp/Background... button has become theStamp... button and Background cannot be used.3. Click Select Backgroun

Note Spaces, tabs, and returns cannot be entered at the beginning or end of a title.7. Complete the setupClick OK, then it returns to Stamp/Background

3. Complete the setupClick OK, then it returns to Stamp/Background dialog box.51

PrintingPrinting from a ComputerPrinting with Application Software that You are Using (Printer Driver)Printing Using the Operation Panel of the Machin

Setting Up Envelope PrintingIf you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJXPS Status Monitor

6. Select the print qualitySelect High or Standard that matches your purpose for Print Quality.7. Complete the setupClick OK.When you execute print, t

Printing on PostcardsThis section describes the procedure for postcard printing.1. Load postcard on the machine2. Open the printer driver setup window

8. Complete the setupClick OK.When you execute printing, the data will be printed onto the postcard.Important When you execute postcard printing, a gu

Displaying the Print Results before PrintingIf you are using the XPS printer driver, replace "Canon IJ Preview" with "Canon IJ XPSPrevi

Setting Paper Dimensions (Custom Size)You can specify the height and width of paper when its size cannot be selected from thePage Size. Such a paper s

4. Set the custom paper sizeSpecify Units, and enter the Width and Height of the paper to be used. Then clickOK.5. Complete the setupClick OK on the P

Editing the Print Document or Reprinting from the PrintHistoryThis function is unavailable when the standard IJ printer driver is used.In the Canon IJ

Editing and Printing a Print DocumentWhen printing multiple documents or pages, you can combine documents, change the printsequence of the documents o

select Move Page from Pages, and select the appropriate item. You can alsoclick and drag a print page to change the print sequence.• Deleting print do

Printing from a ComputerPrinting with Application Software that You are Using (Printer Driver)6

Click Print.When you execute print, the printer uses the specified settings to print the data.Reprinting from the Print HistoryWhen you click Save Pri

Changing the Print Quality and Correcting Image Data Setting the Print Quality Level (Custom) Printing a Color Document in Monochrome Adjusting Tone S

Setting the Print Quality Level (Custom)The print quality level can be set in the Custom.The procedure for setting the print quality level is as follo

Important Certain print quality levels cannot be selected depending on the settings of MediaType.Related Topics Specifying Color Correction Adjusting

Printing a Color Document in MonochromeThe procedure for printing a color document in monochrome is as follows:You can also set a grayscale printing i

When using the grayscale printing function to print Adobe RGB data, convert the data tosRGB data using an application software.Note During Grayscale P

Adjusting ToneWhen printing black and white photos, you can produce the cooling effects of cool colorsand the warming effects of warm colors.Cool is s

5. Adjusting monochrome tonesMoving the Tone slider to the right brings out the warm colors (warm tones), andmoving it to the left brings out the cool

Specifying Color CorrectionYou can specify the color correction method suited to the type of document to be printed.Normally, the printer driver adjus

Driver MatchingWith Canon Digital Photo Color, you can print sRGB data with color tints that mostpeople prefer.ICM (ICC Profile Matching)Adjusts the c

Printing with Application Software that You are Using(Printer Driver) Printing with Easy Setup Basic Various Printing Methods Changing the Print Qua

Adjusting Colors with the Printer Driver Printing with ICC Profiles Interpreting the ICC Profile72

Optimal Photo Printing of Image DataWhen people print images taken with digital cameras, they sometimes feel that the printedcolor tones differ from t

Printing with ICC ProfilesDescribes the procedure for printing by using the color space of Adobe RGB or sRGBeffectively.You can print with a common co

Adjusting Colors with the Printer DriverYou can specify the color correction function of the printer driver to print sRGB data withcolor tints that mo

Click OK on the Main tab.When you execute print, the printer driver adjusts the colors when printing the data.Related Topics Setting the Print Quality

Printing with ICC ProfilesWhen the image data has a specified input ICC profile, you can print by using the colorspace (Adobe RGB or sRGB) of the data

4. Set the other itemsIf necessary, click Color Adjustment tab, and adjust the color balance (Cyan,Magenta, Yellow) and adjust Brightness, Intensity,

4. Select the input profileSelect an Input Profile that matches the color space of the image data.• For sRGB data or data without an input ICC profile

When image data is converted to the color space of the printer, this methodconverts the image data so the color reproduction approximates the shared c

Interpreting the ICC ProfileWhen you need to specify the machine profile, select the ICC profile for the paper to printon.The ICC profiles installed f

Printing with Easy SetupThis section describes the simple procedure for setting the Quick Setup tab so that you cancarry out appropriate printing on t

Adjusting Color BalanceYou can adjust the color tints when printing.Since this function adjusts color balance of the output by changing the ink ratios

The Manual Color Adjustment dialog box opens.3. Adjust color balanceThere are individual sliders for Cyan, Magenta, and Yellow. Each color becomesstro

Important Adjust the slider gradually.4. Complete the setupClick OK on the Main tab.When you execute print, the document is printed with the adjusted

Adjusting Color Balance Using Sample Patterns (PrinterDriver)You can look at the print results of pattern print and adjust the color balance.When you

4. Setting pattern printWhen the Pattern Print dialog box opens, set the following items, and then click OK.Parameters to AdjustSelect Cyan/Magenta/Ye

Note Largest and Large cannot be selected when certain paper sizes or outputpaper sizes are selected.Color Variation Between InstancesSet the amount o

Note You can also set color balance on the Quick Setup tab by choosing PhotoPrinting under Commonly Used Settings, and then choosing Color/IntensityMa

Adjusting Contrast Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)89

Adjusting BrightnessYou can change the brightness of the overall image data during printing.This function does not change pure white or pure black but

Select Light, Normal, or Dark for Brightness, and click OK. The current settings aredisplayed in the settings preview on the left side of the printer

Important The print quality settings that can be selected may differ depending on a printingprofile.6. Check the paper sourceCheck that Paper Source i

Adjusting IntensityYou can dilute (brighten) or intensify (darken) the colors of the overall image data duringprinting.The following sample shows the

Moving the Intensity slider to the right intensifies (darkens) the colors, and movingthe slider to the left dilutes (brightens) the colors.You can als

Adjusting ContrastYou can adjust the image contrast during printing.To make the differences between the light and dark portions of images greater and

Moving the Contrast slider to the right increases the contrast, and moving the sliderto the left decreases the contrast.You can also directly enter a

Adjusting Intensity/Contrast Using Sample Patterns(Printer Driver)You can look at the print results of pattern print and adjust the intensity/contrast

4. Setting pattern printWhen the Pattern Print dialog box opens, set the following items, and then click OK.Parameters to AdjustSelect Intensity/Contr

Color Variation Between InstancesSet the amount of color change between neighboring patterns.Note Large is about double the size of Medium, and Small

Note You can also set intensity/contrast on the Quick Setup tab by choosing PhotoPrinting under Commonly Used Settings, and then choosing Color/Intens

Overview of the Printer Driver Canon IJ Printer Driver How to Open the Printer Driver Setup Window Canon IJ Status Monitor Checking the Ink Status fro

Canon IJ Printer DriverThe Canon IJ printer driver (called printer driver below) is a software that is installed on yourcomputer for printing data wit