Canon iPF750 Basic Guide download pdf (Page 37)

Error Messages

This paper cannot be used. Paper larger than the printer's

maximum supported size has been

loaded.

Push the Release Lever back and load paper of the

correct size.

Paper smaller than the printer's

minimum supported size has been

loaded.

Push the Release Lever back and load paper of the

correct size.

Paper has been loaded that is too

small to print the test pattern for

printhead adjustment or nozzle

checking.

Push the Release Lever back and load unused paper

of A4 size or larger. More than one sheet may be

required depending on the adjustment.

Error Message Cause Corrective Action

(→"Paper Sizes," User Manual)

Hardware error. xxxxxxxx-xxxx

(x represents a letter or number)

The last portion of roll paper was

used during a print job. The paper

was not advanced because the

trailing edge is taped to the roll.

Turn off the printer and remove the roll from the printer

before restoring power.

Fastening tape or the Belt

Stopper has not been removed

inside the Top Cover .

Turn off the printer, open the Top Cover and remove

the tape or the Belt Stopper before restoring power.

An error requiring service may

have occurred.

Turn off the printer and wait at least three seconds

before restoring the power.

Hard disk error. The format of the printer's hard

disk is invalid.

Press the OK button to start reformatting the hard

disk. When formatting is finished, data on the printer

hard disk is erased and the printer automatically

restarts.

If the message is displayed again, write down the

error code and message, turn off the printer, and

contact your Canon dealer for assistance.

File read error. Files on the printer's hard disk

have become corrupted.

Restart the printer. Only the corrupted files will be

deleted, and the printer will restart.

Unknown file. Data sent to keep the printer up to

date (such as paper information) is

in the wrong format.

Check the data. Turn off the printer and wait a while

before restoring power, and then resend the data.

You have uploaded firmware for a

different model.

Check the firmware version. Turn off the printer and

wait a while before restoring power, and then resend

the firmware.

If the message is displayed again, contact your Canon

dealer for assistance.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Comments to this Manuals

No comments

Canon iPF750 Basic Guide Page 37

Comments to this Manuals

Related products and manuals for Print & Scan Canon iPF750