Canon MAXIFY iB4050 User Manual Page 196

  • Download
  • Add to my manuals
  • Print
  • Page
    / 504
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 195
Changing the Printer Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the steps
to specify Prevent abrasion as an example.
Note
The * (asterisk) on the LCD indicates the current setting.
1.
Make sure that the printer is turned on.
2.
Press the Setup button.
The Setup menu screen is displayed.
3.
Use the button to select Device settings, then press the OK button.
The Device settings screen is displayed.
4.
Use the button to select the setting item, then press the OK button.
The setting screen for the selected item is displayed.
5.
Use the button to select the menu, then press the OK button.
6.
Use the button to select a setting item, then press the OK button.
You can select the setting menus below.
Output settings
LAN settings
Dev. user settings
Firmware update
Cassette settings
Reset setting
Note
You can use the printer considering the environment, such as enabling the printer to turn on/off
automatically.
Turning on/off the Printer Automatically
You can reduce the operating noise when printing at night.
196
Page view 195
1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 503 504

Comments to this Manuals

No comments