Canon DR-6030C User Manual download pdf (Page 108)

102 Appendices

1. Regular Maintenance

Clean the scanner on a regular basis as described below to maintain peak

scanning quality.

CAUTION

• When cleaning the scanner or inside of the scanner, turn OFF

the power switch and unplug the Power Cord from the outlet.

• The power needs to be ON when cleaning the rollers and the

shading boards. Be careful of electric shocks when working on

the scanner while the power is ON.

• Do not use excessive force when removing or attaching the

rollers. Doing so may damage them.

• Do not use spray type cleaners to clean the scanner. Precision

mechanisms, such as the light source, may get wet which will

cause a malfunction.

• Never use paint thinner, alcohol, or other organic solvents to

clean the scanner. Such solvents can damage or discolor the

exterior of the scanner. They also create a risk of fire or electrical

shock.

Cleaning the Scanner

To clean the exterior of the scanner, dampen a cloth with water or a mild

detergent, wring the cloth out thoroughly, and then wipe the dirt away. Then

use a dry, soft cloth to wipe away any moisture.

Cleaning the feed path

Dust or paper particles in the document feed opening or inside the scanner can

cause lines in scanned images. Use a blower to periodically clean dust and

paper particles from the document feed opening and the inside of the scanner.

After finishing a large scanning job, you should turn off the scanner and then

clean out any paper particles.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 144 145

No comments

Canon DR-6030C User Manual Page 108