Canon P-150M User Manual download pdf (Page 85)

Maintenance

Daily Maintenance

Clean the scanner on a regular basis as described below to maintain

scanning quality.

WARNING

• For safety reasons, make sure you close the feed tray, turn OFF the

power, and disconnect the USB cable before cleaning the outside

and inside of the scanner.

• Do not use spray cleaners to clean the scanner. The light source

and other precision mechanisms may get wet and become

damaged.

• Never use paint thinner, alcohol, or other organic solvents to clean

the scanner. The exterior of the scanner may become deformed,

discolored, or melted. Such solvents may also cause a fire or

electric shock.

Cleaning the Outside of the Scanner

To clean the outside of the scanner, wipe off any dirt with a cloth that

has been dampened with water or mild detergent solution and

thoroughly wrung out, and then wipe the scanner dry with a clean dry

cloth.

CAUTION

• Do not use a tissue, paper towel, coarse cloth, or the like because

it may scratch the surface of the scanner.

• Do not use a dirty cloth because it may result in scratches.

Cleaning the Inside of the Scanner

Dust or paper particles collecting inside the scanner may cause

streaks to appear on scanned images. Using a blower or the like,

periodically remove dust and paper particles that have collected inside

the scanner. After finishing a large scanning job, for example, close

the feed tray, turn OFF the scanner, disconnect any USB cables, and

then remove the paper particles.

Cleaning the Scanning Glass,

Separation Pad and Rollers

If scanned images contain streaks or scanned documents become

dirty, the scanning glass, separation pad and rollers inside the

scanner are likely to be dirty. Clean them periodically.

Open the feed tray.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 104 105

No comments

Canon P-150M User Manual Page 85