Canon DR-3080C User Manual

Startup ManualRead this manual thoroughly before using this scanner.Keep this manual in a safe place for future reference.

6 Before Using the Unit● Avoid locations that are subject to rapid temperature changes.Condensation inside of the unit can result in inferior image qu

Before Using the Unit 7Notes on Normal HandlingWARNINGTo avoid fire and electric shock, always observe the followingwarnings when using this unit. Do

8 Before Using the UnitCAUTION Do not set the unit up on a wobbly platform, a sloped surface, or any othertype of unstable location. Do not set up th

Before Using the Unit 9Features of the DR-3060/3080CThe main features of the DR-3060/3080C scanner are listed below. Fast document feedingAlthough th

10 Before Using the Unit Text enhanced modeThe scanner is equipped with a "text enhanced" mode that allows you toclearly scan text printed

Before Using the Unit 11Checking the Packing ListThe contents of the carton in which this unit is shipped are described below. Ifanything is missing o

12 Before Using the UnitRemoving Protective Tape and Protective SheetBefore using the scanner, remove the protective tape and protective sheet thatpro

Before Using the Unit 13Names and Functions of PartsThis section explains the name and function of each part. Familiarize yourselfwith the parts befor

14 Before Using the Unit RearCAUTIONDo not block the ventilation openings. Doing so could cause theunit to overheat, creating a risk of fire.Power co

Installing the Scanner 15Installing the ScannerRequirementsIn order to install this scanner, you will need the following:● PC● SCSI interface cable (→

CANON ELECTRONICS INC.1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPANCANON U.S.A. INC.ONE CANON PLAZA, LAKE SUCCESS, N.Y.11042, U.S.A.CANON

16 Installing the ScannerConnecting the Scanner to Your PCConnect the DR-3060/3080C either directly to your PC or to a SCSI devicedaisy chain.Notes on

Installing the Scanner 17SCSI ID and Terminator SettingsUse the DIP switches on the rear of the scanner to make the SCSI ID andterminator settings.For

18 Installing the ScannerTerminator SettingThe terminator should be set to "ON" only in the SCSI device that is at theend of the SCSI daisy

Installing the Scanner 19Connecting the Power CordConnect the power cord that is provided with this scanner to the power cordconnector located on the

20 Installing the ScannerTurning the Power On/OffFollow the procedures described below when turning the power on and off.Turning the Power On1.Turn on

Installing the Scanner 21● If you are using Windows 98, the “Add New Hardware Wizard” dialogbox appears.1. Click the Next button.2. Select “Search for

22 Installing the Scanner● If you are using Windows XP, the “Found New Hardware Wizard” dialogbox appears.1. Load the setup disc into the computer’s C

Installing the Software 23Installing the SoftwareThe following software is included with the scanner.● ISIS/TWAIN driverThis driver allows this scanne

24 Installing the SoftwareNote● The ISIS/TWAIN driver provided with the scanner is not necessarilycompatible with all ISIS-compatible or TWAIN-compati

Installing the Software 253.Click the Start button and then click Run.The Run dialog box appears.4.In the Open box, type "D:\Driver\Setup.exe&quo

The International ENERGY STAR Office Equipment Program is an international programthat promotes energy saving through the use of computers and other o

26 Installing the SoftwareInstalling CapturePerfectFollow the procedure described below to install CapturePerfect.1.Turn on your PC. Windows starts.No

Using the Software 27Using the SoftwareUsing the ISIS/TWAIN DriverThe ISIS/TWAIN driver help file describes how to use the ISIS/TWAINdriver. To access

28 Using the SoftwareUsing CapturePerfectFollow the procedure described below to start and close CapturePerfect.NoteThe basic method for scanning usin

Using the Scanner 29Closing CapturePerfect1.On the File menu, click Exit.CapturePerfect closes.NotesWhen the scanner is scanning or some operation is

30 Using the ScannerUsing the ScannerDocumentsThis scanner is able to scan documents ranging in size from business cardsand checks up to B4 size docum

Using the Scanner 31Setting Up the Paper Feed Tray and the DocumentEject Tray1.Grasp the edge of the paper feed tray and lift it up.2.Gently open the

32 Using the Scanner3.When scanning a large document, pull out the paper feed tray extension.4.Grasp the edge of the document eject tray extension and

Using the Scanner 33Installing the Document Eject GuideWhen scanning a document that is particularly thin or particularly long, itcould droop down ove

34 Using the Scanner4.Attach the document eject guide to the document eject tray as shown in theillustrations. When doing so, align the ( ) mark on th

Using the Scanner 35Loading a Document for ScanningThis scanner supports both automatic and manual feed operation. Themethods for loading the document

36 Using the ScannerNote Make sure that the left edge of the document does not extend to the left ofthe mark. A paper jam may occur if you begin to sc

Using the Scanner 375.Adjust the paper side guides.NoteBefore starting a scan, make sure that the document is loaded in the scannercorrectly. Scanning

38 Using the ScannerWhen Using Manual Feed1.Get ready to perform the scanning operation with your application software,and set the manual feed functio

Using the Scanner 39NoteIt may be difficult to manually feed a sheet that is unusually thin or that iscurled. It may be necessary to gently hold down

40 Using the ScannerPatch Code SheetsPatch Code Sheets are sheets printed with a special pattern that is used forseparating files without interrupting

Using the Scanner 41Functions of Patch Code Sheets● Patch code patternsPATCH TWhen this sheet is detected, a file separator is insertedafter the docum

42 Using the ScannerEffective Area for Detecting Patch Code PatternsNotice● When you copy the originals, adjust the size and density settings to match

Using the Scanner 43Clearing a Paper JamIf a paper jam occurs in the scanner, follow the procedure described below.CAUTIONBe careful when removing jam

44 Using the Scanner4.Raise the upper unit as far as it will go.5.Remove the jammed paper inside of the scanner.When the jam occurred in the feed sect

Using the Scanner 456.Gently lower the upper unit to its normal position.7.Gently push down on the top of the upper unit until the upper unit clicks i

Preface 1PrefaceThank you for purchasing the Canon DR- 3060/3080C scanner. Be sure toread this manual thoroughly before using the scanner in order to

46 Regular MaintenanceRegular MaintenanceClean the scanner on a regular basis as described below in order to maintainpeak scanning quality.CAUTIONFor

Regular Maintenance 47Cleaning the Scanning Glass and the Rollers1.Turn the power off and unplug the power cord from the power outlet.2.If the documen

48 TroubleshootingTroubleshootingThis section describes common problems that may occur while you are usingthe scanner, and how to resolve them.Refer t

Troubleshooting 49✘ The PC does not recognize the scannerThe following are possible causes of the PC failing to recognize the scanner.Check each possi

50 TroubleshootingCause The scanner's SCSI ID is identical to the SCSI ID ofanother device.Action Check the SCSI IDs of all SCSI devices connecte

Troubleshooting 51✘ Images are not scannedCheck the following if the scanner does not scan an image even though thescanning operation is being perform

52 Troubleshooting✘ Resulting scanned images are not correctIf the resulting scanned images are not crisp, if there are lines or spots on theimage, or

Specifications 53SpecificationsType Desktop color image scannerScanning document size Width: 2.2 in. to 10.1 in. (55 mm to 257 mm)When using the auto

54 SpecificationsAmount of paper that can bestacked in automatic feeder10 mm stack, maximumInterface SCSI-IIOther functions Automatic document thickne

Index 55IndexCCapturePerfect 23, 28Install 26Cleaningglass 47main unit 46rollers 47Connectioninterface cable 16power cord 19terminator 18DDIP

2 PrefaceNotational ConventionsThe symbols and indications used in this manual are explained below.Familiarize yourself with these symbols and their m

56 MEMOMEMO

Table of Contents 3Table of ContentsPreface ...

4 Before Using the UnitUsing the Scanner......30Documents ...

Before Using the Unit 5Before Using the UnitTo Ensure Safe OperationIn order to ensure safe operation, be certain to read the cautions describedbelow.