Canon EOS 50D User Manual

INSTRUCTION MANUALENGLISHINSTRUCTION MANUAL

10Power Battery• Charging Î p.24• Battery check Î p.28 Power outlet Î p.190 Auto power off Î p.44Lens Attaching/Detaching Î p.31 Zoom Î p.32 Image Sta

100The metering mode is the method of measuring the brightness of the subject. In the Basic Zone modes, evaluative metering is set automatically.1Pres

101Exposure compensation is used to alter the standard exposure set by the camera. You can make the image look brighter (increased exposure) or darker

102By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±2 stops in 1/3-stop increments for three successiv

103Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure

104When bulb is set, the shutter stays open while you hold down the shutter button completely, and closes when you let go of the shutter button. This

105Bulb ExposuresIf you take a picture without looking at the viewfinder, light entering the eyepiece can throw off the exposure. To prevent this, use

106Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations can also help when you us

107E-TTL II autoflash obtains high-precision and consistent flash shots.If necessary, the built-in flash will pop-up automatically in low-light or bac

108Using the Built-in FlashEffective Range of Built-in Flash [Approx. meters/feet]Using the red-eye reduction lamp before taking a flash picture can r

109Using the Built-in FlashIn the same way as normal exposure compensation, you can set exposure compensation for flash. You can set flash exposure co

11Index to FeaturesShooting Creative Auto Î p.57 Quick Control screen Î p.38 Self-timer Î p.90 Program AE Î p.92 Shutter-priority AE Î p.94 Aperture-p

110Using the Built-in FlashFE (flash exposure) lock obtains and locks the correct flash exposure reading for any part of a subject.1Press the <D>

111The built-in flash and an external Speedlite can also be set with the menu. The menu for the external Speedlite will be applicable only to EX-serie

1123 Flash ControlN E-TTL IIFor normal flash exposures, set it to [Evaluative].If [Average] is set, the flash exposure will be averaged for the entir

113Basically operates like a built-in flash for easy operation.When an EX-series Speedlite is attached to the camera, almost all the autoflash control

114External SpeedlitesSync SpeedThe camera can synchronize with non-Canon compact flash units at 1/250 sec. and slower speeds. With large studio flas

1156Live View ShootingYou can shoot while viewing the picture on the camera’s LCD monitor. This is called “Live View shooting.”Live View shooting is e

116Set the camera for Live View shooting.1Set the shooting mode. Set the shooting mode to a Creative Zone mode. Live View shooting does not work in

117Preparing for Live View ShootingN5Display the Live View image. Press the <A> button.X The Live View image will appear on the LCD monitor. P

1181Use AF to focus. Press the <p> button.X The camera will focus with the current AF mode (p.121).2Take the picture. Press the shutter button

119ShootingN Pressing the <M> button will display the menu screen so you can set menu functions. Press the <M> button again to return to

12Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used

120ShootingN Each time you press the <B> button, the information display will change.About the Information DisplayMagnifying frameHistogramISO

121Three AF modes are provided: [Quick mode], [Live mode] (p.123), and [Liveu mode] (face detection) (p.124). If you want to achieve precise focusing,

122Using AF to FocusN2Select the AF point. Press the <o > button, then use <9> to select the AF point. If you keep tilting

123Using AF to FocusNThe image sensor is used to focus. Although AF is possible with the Live View image displayed, the AF operation will take longer

124Using AF to FocusNWith the same AF method as with the Live mode, the human face is detected and focused. Have the person face the camera.1Display t

125Using AF to FocusNAF operation It will take a slightly longer time to focus. Even when focus has been achieved, pressing the <p> button wil

126Using AF to FocusNShooting conditions which can make focusing difficult: Low-contrast subjects such as the blue sky and solid-color surfaces. Sub

127Magnify the image and focus manually. 1Set the lens focus mode switch to <MF>. Turn the lens focusing ring to focus roughly.2Move the magnif

128Instructions for setting the [6 Live View function settings] menu’s [Silent shoot.] are explained below. Mode 1The shooting operation noise is qui

129Notes about the Live View image Under low light or bright light conditions, the Live View image might not reflect the brightness of the captured i

13Handling PrecautionsLCD Panel and LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effecti

130Notes about Custom Functions Live View shooting will disable some Custom Function settings (p.173). If [8C.Fn II -4: Auto Lighting Optimizer] (p.

131 7Image PlaybackThis chapter explains how to playback and erase images, how to display images on a TV screen, and other playback-related functions.

1321Playback the image. Press the <x> button.X The last captured image or last image viewed will appear.2Select the image. To playback images

133x Image Playback About the Highlight AlertWhen the [4 Highlight alert] menu is set to [Enable], overexposed highlight areas will blink. To obtain

134x Image Playback About the HistogramThe brightness histogram display shows the exposure level distribution and overall brightness. And the RGB his

135Search for images quickly with the index display showing four or nine images on one screen.1Turn on the index display. During image playback, pres

136x Searching for Images QuicklyWith the single image display, index display, and magnified view, you can turn the <6> dial to jump through the

137You can magnify the image by 1.5x to 10x on the LCD monitor.1Magnify the image. During image playback, press the <u> button.X The image will

138You can rotate the image to the desired orientation.1Select [Rotate]. Under the [3] tab, select [Rotate], then press <0>.2Select the image.

139You can playback the images in the card as an automatic slide show.1Select [Slide show]. Under the [4] tab, select [Slide show], then press <0&

14Quick Start Guide1Insert the battery. (p.26)To recharge the battery, see page 24.2Attach the lens. (p.31)When attaching an EF-S lens, align it with

1403 Auto Playback (Slide Show) 3Set the Play time and Repeat options. Turn the <5> dial to select [Set up], then press <0>. Set the [Pl

141You can also view the images on a TV set. Turn off the camera and the television before connecting them.* Depending on the TV monitor, part of the

142Viewing the Images on TVThe HDMI Cable HTC-100 (sold separately) is required.1Connect the HDMI cable to the camera. Connect the HDMI cable to the

143Protecting the image prevents it from being erased accidentally.1Select [Protect images]. Under the [3] tab, select [Protect images], then press &

144You can either select and erase images one by one or erase them in one batch. Protected images (p.143) will not be erased.Once an image is erased,

145You can adjust the brightness of the LCD monitor to make it easier to read.1Select [LCD brightness]. Under the [6] tab, select [LCD brightness], t

146Changing Image Playback SettingsVertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and personal

1478Sensor CleaningThe camera has a Self Cleaning Sensor Unit attached to the image sensor’s front layer (low-pass filter) to shake off dust automatic

148Whenever you set the power switch to <1/J> or <2>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the fr

149Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. However, in case visible dust sti

15Quick Start Guide6Set the Mode Dial to <1> (Full Auto). (p.48)All the necessary camera settings will be set automatically.7Focus the subject.

1503 Appending Dust Delete DataN3Photograph a solid-white object. At a distance of 20 cm - 30 cm / 0.7 ft. - 1.0 ft., fill the viewfinder with a patte

151Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc.The surface of the image sensor is extr

1523 Manual Sensor CleaningN While cleaning the sensor, never do any of the following. Doing any of the following will cut off the power and close th

1539Printing Images and TransferringImages to a Computer Printing (p.154)You can connect the camera directly to a printer and print out the images in

154You do the direct printing procedure entirely with your camera while you look at the LCD monitor.1Set the camera’s power switch to <2>.2Set u

155Preparing to Print6Playback the image. Press the <x> button.X The image will appear, and the <w> icon will appear on the upper left to

156The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer’s i

157wPrinting Select the size of the paper loaded in the printer, then press <0>.X The paper type screen will appear. Select the type of the pa

158wPrinting4Set the printing effects. Set as necessary. If you need not set any printing effects, go to step 5. The screen display may differ depen

159wPrinting5Set the date and file number imprinting. Set as necessary. Select <I>, then press <0>. Set as desired, then press <0>

16For detailed information, reference page numbers are provided in parentheses (p.**).NomenclatureDigital terminal (p.154,167)Video OUT terminal (p.14

160wPrintingIn step 4 on page 158, select the printing effect. When the <e> icon is displayed next to <z>, press the <B> button. You

161wPrintingYou can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you se

162wPrinting Depending on the printer, the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, the gr

163You can set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot

164Digital Print Order Format (DPOF)4 Exit the setting. Press the <7> button.X The print order screen will reappear. Next, select [Sel.Image],

165Digital Print Order Format (DPOF) Sel.ImageSelect and order images one by one.Press the <I> button to display the three-image view. To retur

166With a PictBridge printer, you can easily print images with DPOF.1 Preparing to print. See page 154.Follow the “Connecting the Camera to a Printer

167By connecting the camera to a personal computer, you can transfer images from the camera’s card by operating the camera. This feature is called dir

168d Transferring Images to a Personal ComputerThe images sent to the personal computer will be saved in the [My Pictures] folder or [Pictures] folder

169d Transferring Images to a Personal ComputerOptions other than [All Images] are explained below. To start the image transfer, press the <l> b

17NomenclatureTripod socketExtension system terminalBattery compartment cover (p.26)Battery compartment cover release lever (p.26)<V> Focal plan

170d Transferring Images to a Personal ComputerUnder the [3] tab, you can use [Transfer order] to select the images to be transferred to a personal co

17110Customizing theCameraWith Custom Functions, you can change the camera functions according to your preference. Also, the current camera settings c

1721Select [8]. Turn the <6> dial to select the [8] tab.2Select the group. Turn the <5> dial to select C.Fn I - IV, then press <0>

1733 Custom FunctionsNC.Fn I: Exposure1 Exposure level incrementsp.1742 ISO speed setting increments3 ISO expansion4 Bracketing auto cancel5 Bracketin

1743 Custom Function SettingsNC.Fn I: ExposureC.Fn I -1 Exposure level increments0: 1/3-stop1: 1/2-stopSets 1/2-stop increments for the shutter sp

1753 Custom Function SettingsNC.Fn I -5 Bracketing sequenceThe AEB shooting sequence and white balance bracketing sequence can be changed.0: 0, -,

1763 Custom Function SettingsNC.Fn II: ImageC.Fn II -1 Long exposure noise reduction0: Off1: AutoFor 1 sec. or longer exposures, noise reduction i

1773 Custom Function SettingsNC.Fn II -3 Highlight tone priority0: Disable1: EnableImproves the highlight detail. The dynamic range is expanded fr

1783 Custom Function SettingsNC.Fn III: Autofocus/DriveC.Fn III -1 Lens drive when AF impossibleIf autofocus is executed, but focus cannot be achi

1793 Custom Function SettingsNC.Fn III -3 AF point selection method0: NormalPress the <S> button and use <9> to select the AF point.1:

18NomenclatureLCD PanelThe display will show only the settings currently applied.Shutter speedBusy (buSY) Built-in flash recycling (buSY)<M> Bee

1803 Custom Function SettingsNC.Fn III -6 Mirror lockup0: Disable1: EnablePrevents camera vibrations caused by the reflex mirror action which can

1813 Custom Function SettingsNC.Fn IV: Operation/OthersC.Fn IV -1 Shutter button/AF-ON button0: Metering + AF start1: Metering + AF start/AF stopD

1823 Custom Function SettingsNC.Fn IV -3 Assign SET buttonYou can assign a frequently-used function to <0>. When the camera is ready to shoo

1833 Custom Function SettingsNC.Fn IV -5 Focusing ScreenIf you change the focusing screen, change this setting to match the focusing screen type.

1843 Custom Function SettingsNC.Fn IV -6 Add original decision data0: Off1: OnData for verifying whether the image is original or not is appended

185For faster access, you can register up to six menus and Custom Functions whose settings you change frequently.1Select [My Menu settings]. Under th

186Under the Mode Dial’s <w> and <x> positions, you can register most of the current camera settings containing your preferred shooting mo

18711ReferenceThis chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to

188When the camera is ready to shoot, press the <B> button and “Camera settings” and “Shooting functions” screens will appear.When “Shooting fun

189B Checking Camera Settings When you press <9> straight down, the Quick Control screen appears (p.38). If you press the <m>, <o>

19NomenclatureViewfinder InformationThe display will show only the settings currently applied.Spot metering circleAF points (Superimposed display)<

190With AC Adapter Kit ACK-E2 (sold separately), you can connect the camera to a household power outlet and not worry about the battery level.1Connect

191The date/time (back-up) battery maintains the camera’s date and time. Its service life is about 5 years. If the date/time is reset when the battery

192These are supplemental instructions for using Battery Grip BG-E2 with this camera. For instructions other than “Detaching the Battery Compartment C

1931 Shooting 1 (Red) Page2 Shooting 2 (Red)3 Playback 1 (Blue)Menu SettingsQuality73 / 83 / 74 / 84 / 76 / 861 / D1 / D260Red-eye On/OffOff / On 108B

194Menu Settings4 Playback 2 (Blue) Page5 Set-up 1 (Yellow)6 Set-up 2 (Yellow)* If you previously used a WFT-E3 with the EOS 40D, you can use the WFT

195Menu Settings7 Set-up 3 (Yellow) Page8 Custom Functions (Orange)9 My Menu (Green)INFO. button Normal disp. / Camera set. / Shoot. func. 188Flash

196o: Set automatically k: User selectable : Not selectableFunction Availability Tablekkkooooooookkkooooooookkkooooooookkkooooooookkkoooooookkkooo

197Function Availability Tableo: Set automatically k: User selectable : Not selectableookokookokookokookokookoookokkkkkkkkkkkkkkkkkkkokkkkkkkkkkkk

198If there is a problem, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer o

199Troubleshooting Guide The card is not properly inserted (p.29). If the card is full, replace the card or delete unnecessary images to make room (

2Thank you for purchasing a Canon product.The EOS 50D is a high-performance, digital SLR camera featuring a fine-detail CMOS sensor with 15.10 effecti

20NomenclatureMode DialThe Mode Dial has the Basic Zone modes and Creative Zone modes.Basic ZoneAll you do is press the shutter button. Fully automati

200Troubleshooting Guide When using Live View shooting, use a memory card (a hard disk-type card such as MicroDrive is not recommended). A hard disk-

201If there is a problem with the camera, an error message appears. Follow the on-screen instructions.To recover from the error screen, turn the power

202System Map220EXST-E2 430EX II 580EX II Macro Ring Lite MR-14EXMacro Twin Lite MT-24EXEyecup EbRubber Frame EbEyepiece Extender EP-EX15Angle Find

203System MapHDMI Cable HTC-100Timer Remote Controller TC-80N3Remote Switch RS-80N3Wireless Controller LC-5EF-S lensesEF lensesCF cardCard read

204•TypeType:Digital, single-lens reflex, AF/AE camera with built-in flashRecording media: Type I or II CF card, UDMA-compatibleImage sensor size: 22.

205Specifications• ViewfinderType: Eye-level pentaprismCoverage: Vertical/Horizontal approx. 95%Magnification: Approx. 0.95x (-1 m-1 with 50mm lens at

206Specifications•ShutterType: Electronically-controlled, focal-plane shutterShutter speeds: 1/8000 sec. to 1/60 sec. (Full Auto mode), X-sync at 1/25

207Specifications•LCD MonitorType: TFT color liquid-crystal monitor (Brightness adjustable to 7 levels)Monitor size and dots: 3-in. with approx. 920,0

208Specifications• Dimensions and WeightDimensions (W x H x D): 145.5 x 107.8 x 73.5 mm / 5.7 x 4.2 x 2.9 in.Weight: Approx. 730 g / 25.7 oz. (body on

209Specifications• EF-S 18-200mm f/3.5-5.6 ISAngle of view: Diagonal extent: 74°20’ - 7°50’Horizontal extent: 64°30’ - 6°30’Vertical extent: 45°30’ -

21NomenclatureNomenclature for Kit LensesEF-S 18-200mm f/3.5-5.6 IS and EF-S 18-55mm f/3.5-5.6 ISEF-S 17-85mm f/4-5.6 IS USM and EF 28-135mm f/3.5-5.6

210Specifications• EF 28-135mm f/3.5-5.6 IS USMAngle of view: Diagonal extent: 75° - 18°Horizontal extent: 65° - 15°Vertical extent: 46° - 10°Lens con

211Trademarks Adobe is a trademark of Adobe Systems Incorporated. CompactFlash is a trademark of SanDisk Corporation. Windows is a trademark or reg

212Safety WarningsFollow these safeguards and use the equipment properly to prevent injury, death, and material damage.Preventing Serious Injury or De

213• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of elec

214European Union (and EEA) only.This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Dir

215AAC Adapter Kit ...190Access lamp...30A-DEP (Automatic depth-of-field AE)...99Ad

216IndexDDate J Date/TimeDate/Time ...42Date/time battery replacement...191Depth-of-field preview...

217IndexHi-Definition ...142Highlight alert...133Highlight detail loss ...

218IndexMetering mode...100, 189Evaluative / Partial / Spot / Center-weighted averageMF (Manual focusing)...88Mir

219IndexRevert to default settings ...45Review time ...145Rotate (image) ...138, 146, 161SSafet

22NomenclatureBattery Charger CG-580Charger for Battery Pack BP-511A (p.24).Battery Charger CB-5LCharger for Battery Pack BP-511A (p.24).Battery pack

220

221

222

223

This Instruction Manual booklet is current as of August 2008. For information on the camera’s compatibility with any accessories and lenses introduced

231Getting StartedThis chapter explains preparatory steps and basic camera operations.Attaching the StrapPass the end of the strap through the camera’

241Remove the protective cover. When you remove the battery from the camera, be sure to reattach the cover to protect it against short circuiting.2At

25Recharging the Battery Recharge the battery on the day before or on the day it is to be used.Even during non-use or storage, a charged battery will

26Load a fully charged Battery Pack BP-511A into the camera.1Open the battery compartment cover. Slide the lever as shown by the arrow and open the c

27<2> : The camera is turned off and does not operate. Set to this position when not using the camera.<1> : The camera turns on.<J>

28Turning on the PowerWhen the power switch is set to <1> or <J>, the battery level will be indicated in one of four levels:z : Battery le

29Although the thickness is different between the two types of CF cards, either one can be inserted into the camera. Also, Ultra DMA (UDMA) cards and

3Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer.* Battery Charge

30Installing and Removing the CF Card1Open the cover. Set the power switch to <2>. Make sure the access lamp is off, then open the cover.2Remo

311Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrow.2Attach the lens. Align the EF-S lens with the c

32Attaching and Detaching a LensTo zoom, turn the zoom ring on the lens with your fingers.If you want to zoom, do it before focusing. Turning the zoom

33The procedure explained here is based on the EF-S17-85mm f/4-5.6 IS USM lens as an example.* IS stands for Image Stabilizer.1Set the IS switch to &

34Turn the dioptric adjustment knob. Turn the knob left or right so that the nine AF points in the viewfinder look sharp.To obtain sharp images, hold

35Basic OperationThe shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely.

36Basic Operation(1)After pressing a button, turn the <6> dial.When you press a button, its function remains selected for 6 seconds (9). During

37Basic OperationBefore using the <5> dial, set the power switch to <J>.(1)After pressing a button, turn the <5> dial.When you press

38The shooting settings are displayed on the LCD monitor where you can quickly select and set the functions. This is called the Quick Control screen.1

39Using the Quick Control Screen On the Quick Control screen, select the function and press <0>. The respective setting screen will then appear

4Icons in this Manual<6> : Indicates the Main Dial.<5> : Indicates the Quick Control Dial.<9> : Indicates the Multi-controller.<0

40By setting various functions with the menus, you can set the image-recording quality, date/time, etc. While looking at the LCD monitor, you use the

41Menu Operations1Display the menu. Press the <M> button to display the menu.2Select a tab. Turn the <6> dial to select a tab.3Select th

421Select [Language]. Under the [6] tab, select [Language] (the third item from the top), then press <0>.2Set the desired language. Turn the &

43Before You StartIf the card is new or was previously formatted by another camera or personal computer, format the card with the camera.When the card

44Before You StartYou can change the auto power-off time for the camera to turn off automatically after a certain period of non-operation. If you do n

45Before You StartThe camera’s shooting settings and menu settings can be reverted to the default.1Select [Clear settings]. Under the [7] tab, select

46Before You StartIf you use EOS Utility (provided software) to set your copyright information, the copyright information will be added to the image’s

472Basic ShootingThis chapter explains how to use the Basic Zone modes on the Mode Dial for best results.With the Basic Zone modes, all you do is poin

481Set the Mode Dial to <1>.2Aim any AF point over the subject. All the AF points will operate, and focus will generally be achieved at the AF

491 Fully Automatic Shooting The focus confirmation light <o> blinks and focus is not achieved.Aim the AF point over an area having good contras

5For first-time users, chapters 1 and 2 explain the camera’s basic operations and shooting procedures.ChaptersIntroductionCamera basics.2Getting Start

50Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective.In the <1> (Full Au

51The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes flesh tones and the hair look softer than with

52Use the <3> (Landscape) mode for wide scenery, night scenes, or to have everything in focus from near to far. The greens and blues also become

53When you want to photograph flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macr

54To photograph a moving subject, whether it is a child running or a moving vehicle, use the <5> (Sports) mode. Use a telephoto lens.Using a te

55To shoot someone at night and obtain a natural-looking exposure in the background, use the <6> (Night Portrait) mode. Use a wide-angle lens a

56In places where flash photography is prohibited, use the <7> (Flash Off) mode. This mode is also effective for candlelight scenes when you wan

57The <C> (Creative Auto) mode enables you to easily change the picture’s brightness, etc. The default settings are the same as the <1> (F

C Creative Auto Shooting58(1) Flash firing<a> (Auto firing), <D> (Flash on), or <b> (Flash off) can be selected. If you set <b>

593Image SettingsThis chapter explains image-related function settings: Image-recording quality, ISO speed, Picture Styles, white balance, color space

612IntroductionItem Check List... 3Conventions Used in

60You can select the pixel count and the image quality. The following JPEG quality settings can be set: 73, 83, 74, 84, 76, 86. RAW images captured as

613 Setting the Image-recording QualityGuide to Image-recording Quality Settings (Approx.) Figures for the file size, possible shots, and maximum bur

623 Setting the Image-recording QualityThe RAW image is the data output by the image sensor and converted to digital data which is recorded on the car

633 Setting the Image-recording QualitySet the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In the Basic Zone mode

64i: Setting the ISO SpeedNISO Speed GuideIf the ISO speed is set to “A”, the actual ISO speed to be set will be displayed when you press the shutter

65By selecting a Picture Style, you can obtain the image effects matching your photographic expression or the subject.In the Basic Zone modes (except

66A Selecting a Picture StyleNS NeutralThis Picture Style is for users who prefer to process images with their personal computer. For natural colors a

67You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots.

68A Customizing a Picture StyleNFor Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explain

69You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User D

7Contents534Image Settings 59Setting the Image-recording Quality...60i: Setting the ISO

70A Registering a Picture StyleN6Set the parameter. Turn the <5> dial to adjust the parameter as desired, then press <0>.For details, see

71White balance (WB) is for making the white areas look white. Normally, the <Q> (Auto) setting will obtain the correct white balance. If natura

72B: Setting the White BalanceNCustom white balance enables you to manually set the white balance for a specific light source for better accuracy. Do

73B: Setting the White BalanceNYou can set the white balance’s color temperature numerically in Kelvin. This is for advanced users.1Select [White bala

74You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature c

753 White Balance CorrectionNWith just one shot, three images having a different color tone can be recorded simultaneously. Based on the color tempera

76Due to the lens characteristics, the four corners of the picture might look darker. This is called lens light fall-off or drops in peripheral illumi

773 Lens Peripheral Illumination CorrectionThe camera already contains lens peripheral light correction data for about 20 lenses. In step 2, if you se

78You can freely create and select the folder where the captured images are to be saved.This is optional since a folder will be created automatically

793 Creating and Selecting a Folder With the Select folder screen displayed, turn the <5> dial to select the desired folder, then press <0&g

8Contents678D Using the Built-in Flash... 107Flash Control ...

80The file number is like the frame number on a roll of film. The captured images are assigned a sequential file number from 0001 to 9999 and saved in

813 File Numbering MethodsThe file numbering restarts from 0001 each time the card is replaced or a new folder is created.Whenever the card is replace

82The color space refers to the range of reproducible colors. With this camera, you can set the color space for captured images to sRGB or Adobe RGB.

834Setting the AF andDrive ModesThe viewfinder has 9 AF points. By selecting a suitable AF point, you can shoot with autofocus while framing the subje

84Select the AF mode suiting the shooting conditions or subject. In the Basic Zone modes, the optimum AF mode is set automatically.1On the lens, set t

85f: Selecting the AF ModeNThis AF mode is for moving subjects when the focusing distance keeps changing. While you hold down the shutter button halfw

86Select one of the nine AF points to autofocus. In the Basic Zone and <8> modes, automatic AF point selection will take effect automatically. Y

87S Selecting the AF PointNUnder low-light conditions, when you press the shutter button halfway, the built-in flash fires a brief burst of flashes. I

88Autofocus can fail to achieve focus (the focus confirmation light <o> blinks) with certain subjects such as the following:Subjects difficult t

89Single and continuous drive modes are provided. In the Basic Zone modes, the optimum drive mode is set automatically.1Press the <o> button. (9

9Contents10119Printing Images and Transferring Images to a Computer153Preparing to Print ...

90Use the self-timer when you want to be in the picture. The <j> (10 sec. timer) can be used in all shooting modes.1Press the <o> button.

915Advanced OperationsWith the Creative Zone modes, you can set the desired shutter speed or aperture to obtain the result you want. You take control

92The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE.*<d> stands for Progr

93d: Program AE If the “30"” shutter speed and the maximum aperture blink, it indicates underexposure.Increase the ISO speed or use flash. If t

94In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the correct exposure matching the brightness of the

95s: Shutter-Priority AE If the maximum aperture blinks, it indicates underexposure.Turn the <6> dial to set a slower shutter speed until the a

96In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the correct exposure suiting the subject br

97f: Aperture-Priority AEPress the depth-of-field preview button to stop down to the current aperture setting. You can check the depth of field (range

98In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator in the viewfi

99Objects in the foreground and background will be in focus automatically. All the AF points will function to detect the subject, and the aperture req