Canon VB-C50i/VB-C50iR User Manual download pdf (Page 115)

4-45

VB Administration Tools

q Used Area

Check the number of the motion detection area to be used

and the detection area frame is displayed in the Viewer.

You can create a maximum of 4 motion detection areas.

Schedule Setting Tool

Note

The frame rate specified in the “Maximum Frame Rate” (→ P.3-18) must be higher

than the one specified using this tool.

3. Create a motion detection area (Area tab)

Create an area in the viewer within which motion detection is to be performed (motion

detection area). You can create a maximum of 4 motion detection areas, and reshape

and move each area frame by dragging the mouse. Change the shape by dragging the

black boxes on the 4 corners and sides of the frame, and move the frame by dragging the

inside of it with the mouse. Also, you can set a separate level of motion detection in each

area. See step 4 for how to set up the level of motion detection.

Tip

● When the network traffic is high, the specified frame rate may not be achieved.

● When a slow frame rate is set, motion detection is applied to images sampled from

the captured video. In this way, motion can be detected even in slowly moving

objects.

● The frame rate specified above only applies to the motion detection.

4. Setting the level of motion detection for the motion detection area (Area tab)

These settings determine how great the variation must be (sensitivity), how large the changed

area must be as a proportion of the whole detection area (area ratio), and how long the

variation must continue (duration) before it is recognized as motion and the specified action is

performed.

You can also set the level of motion detection for the device by checking in Video Mode the

image recorded with Live Mode (→ P.4-51).

w Setting Area

If you have created two or more motion detection areas, you can set separate levels of motion detection

in each area frame. In Setting Area, select a setting number.

e Sensitivity

Select the sensitivity of the motion detection in a range of 1-256. Either enter the setting or set sensitivity

by dragging the slide bar. The larger the numeric value, the higher the degree of sensitivity will be.

Continued on the following page. a

004-VBC50i-E-US 06.7.6, 11:35 AM45

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 243 244

No comments

Canon VB-C50i/VB-C50iR User Manual Page 115