
86
Handling Error Messages
Is the DHCP server functioning correctly?
X Check the DHCP server settings to make sure it is functioning
correctly as a DHCP server.
X If applicable, ask your network administrator to ensure that the DHCP
server can be used.
What to check on the camera
Is the camera’s network setting set to [Auto setting], or its IP
address setting set to [Auto assign]?
X If you are not using a DNS server, set the camera’s DNS address
setting to [Disable] (p.17).
On the camera, does the DNS server’s IP address setting match
the server’s actual address?
X Configure the IP address on the camera to match the actual DNS
server address (p.17, 97).
What to check on the DNS server
Is the DNS server on?
X Turn the DNS server on.
Are the DNS server settings for IP addresses and the
corresponding names correct?
X On the DNS server, make sure IP addresses and the corresponding
names are entered correctly.
22: No response from DNS server
Comments to this Manuals