Canon S100 Setup Guide Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
12
1. Attach the supplied USB cable to a USB port directly on the computer
and to the DIGITAL terminal on the camera as shown below.
• There is no need to turn the camera or computer power off when attaching or
detaching the USB cables.
• Please consult your computer’s manual for the location of the USB ports.
2. Install the USB driver the first time you connect via a USB port. (➜ p. 13)
Precaution for Unplugging Cables
from the DIGITAL Terminal
• Always press the [PUSH] button on the
connector to detach the cable from the
camera’s DIGITAL terminal.
USB Port
DIGITAL Terminal
1. Open the DIGITAL terminal cover
by slipping a fingernail under the
top edge and pulling down.
USB Connector
USB Connector
2. Insert the connector so that the
4
marks on
the connector and camera align.
PUSH Button
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 83 84

Comments to this Manuals

No comments