Canon EOS 6D User Manual download pdf (Page 40)

When you use the IS lens’ built-in Image Stabilizer, camera shake is

corrected to obtain a sharper shot. The procedure explained here is

based on the EF24-105mm f/4L IS USM lens as an example.

* IS stands for Image Stabilizer.

Set the Image Stabilizer switch to

<1>.

 Also set the camera’s power switch to

<1>.

Press the shutter button halfway.

 The Image Stabilizer will operate.

Take the picture.

 When the picture looks steady in the

viewfinder, press the shutter button

completely to take the picture.

About the Lens Image Stabilizer

 The Image Stabilizer cannot correct “subject blur”, when the subject

moves at the time of exposure.

 For bulb exposures, set the IS switch to <2>. If <1> is set, Image

Stabilizer misoperation may occur.

 The Image Stabilizer may not be effective for excessive shaking such as

on a rocking boat.

 The Image Stabilizer may not be effective when you use the

EF24-105mm f/4L IS USM lens for panned shots.

 The Image Stabilizer can operate with the lens focus mode switch set to

either <AF> or <MF>.

 When using a tripod, you can still shoot with the IS switch set to <1>

with no problem. However, to save battery power, setting the IS switch to

<2> is recommended.

 The Image Stabilizer is effective even when the camera is mounted on a

monopod.

 With the EF24-105mm f/3.5-5.6 IS STM lens, the Image Stabilizer mode

may switch automatically to suit the shooting conditions.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 195 196

No comments

Canon EOS 6D User Manual Page 40