Canon CDI-E075-010 Service Manual download pdf (Page 6)

2-4

CHAPTER 2. TECHNICAL DESCRIPTION

2.2.2 Picture Processing

1) The drive pulse of the CCD sensor is created by both clock from DSP and TG that is operated by

sync. signal.

The picture signal by the drive pulse is output from CCD sensor.

The output signal of the CCD picture is converted to the signal processing and the digital data by

the CDS and A/D converter, and is sent to the DSP.

2) The DSP circuit performs the following signal processing.

• Processes the picture data (using the SDRAM).

• Writes and reads the picture data to and from the CF card.

• Outputs the picture data to the CPU.

• Outputs analog video signal to the LCD and VIDEO OUT.

3) The video signal that is supplied form the DSP is controlled by the LCD driver and is displayed

on the LCD. The video amplifier is activated when the AV jack is inserted to the video jack and

drives the video signal in 75 Ω.

2.2.3 Audio Processing (Recording and Playback Functions)

1) During recording of moving picture

• Audio signal of microphone is converted to digital data by CPU and is recorded.

2) During playback, it is converted back to analog audio signal by CPU and is output from speaker

and AV jack.

1 2 3 4 5 6 7 8 9 10 11 ... 124 125

No comments

Canon CDI-E075-010 Service Manual Page 6