Canon C100 Instruction Manual download pdf (Page 150)

Connecting to a Wi-Fi Network

150

7 Enter the encryption key as described in Encrypted Access Points (A 148).

• This encryption key (password) is needed to connect the network device to the camcorder. If necessary,

write it down.

8 Continue with the procedure to configure the IP address assignment (A 150).

Configuring the IP Address Settings

At this point you need to configure the TCP/IP settings for the camcorder to be able to connect to a Wi-Fi

network. If you need to configure the TCP/IP settings manually, consult the network administrator to obtain the

relevant information.

1 Select the method for assigning the IP address: Select [Automatic] or [Manual] and then press the

joystick.

• If you selected [Automatic], IP settings will be assigned automatically. Continue with the procedure to review

and save the configuration (A 150).

2 If you selected [Manual], enter manually the IP address assigned to the camcorder.

• Push the joystick up/down to select a value for the first field and then press the joystick to move to the next

field. After completing the four fields of an address, select [Set] and then press the joystick to confirm the

address.

3 Enter the [Subnet Mask] and [Default Gateway] addresses in the same way.

• For Camera Access Point connections, the rest of the procedure is not necessary. Continue with the

procedure to review and save the configuration (A 150).

4 Select the method for setting up the DNS server: Select [Do not use DNS] or [Manual].

• If you selected [Do not use DNS], a DNS server will not be used. Continue with the procedure to review and

save the configuration (A 150).

5 If you selected [Manual], enter the [Primary DNS Server] and [Secondary DNS Server] using the

method described in step 2.

• After entering the secondary DNS server, continue with the procedure to review and save the configuration

(A 150).

Saving the Configuration

1 Review the access point’s configuration and then press the joystick.

• The first screen shows the access point’s SSID and the type of connection. Push the joystick up/down to

review additional settings before pressing the joystick.

2 Select the desired configuration number and then press the joystick.

• You can save up to 5 different network configuration profiles in the camcorder. If you select a configuration

number that was already in use, the previous configuration will be overwritten by the new one.

3 To change the [Network Configuration Name], select [Input] and then press the joystick.

• If you wish, you can give the network configuration profile a more descriptive name to make it easier to

identify. Enter the desired name using the keyboard screen (A 148).

4 Select [OK] and then press the joystick to save the network configuration.

5 When the confirmation screen appears, press the joystick.

COPY

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 213 214

No comments

Canon C100 Instruction Manual Page 150