Canon C100 Instruction Manual download pdf (Page 66)

Adjusting the Aperture

Automatic Aperture

When a compatible lens is attached to the camcorder, you can have the camcorder automatically adjust the

aperture (f/stop).

1 Open the aperture [Mode] submenu.

[~ Camera Setup] > [Iris] > [Mode]

• This setting is available only when an EF lens compatible with

automatic aperture is attached to the camcorder.

• For non-compatible lenses, the aperture mode will be set to [Manual]

and cannot be changed.

2 Select [Automatic] and then press the joystick.

• The camcorder will automatically adjust the aperture to obtain optimal

exposure. Also, m will appear on the screen next to the aperture

value.

NOTES

• If you set an assignable button to [Iris Mode] (A 107), you can press the button to change the aperture

mode.

Exposure Compensation - AE Shift

Use AE shift to compensate the exposure that was set using automatic aperture or push auto iris, in order to

darken or lighten the image.

1 Open the [AE Shift] submenu.

[~ Camera Setup] > [AE Shift]

2 Select an AE shift level and then press the joystick.

Available AE shift levels

Remote Operation Using Browser Remote

After completing the necessary preparations (A 153), you can use AE shift remotely from a Wi-Fi enabled

device using the Browser Remote application.

Press [IRIS +] and [IRIS -]to adjust the AE shift level.

NOTES

• You can also set the AE shift level by turning the control dial while holding the PUSH AUTO IRIS button

pressed down.

+2.0 +1.75 +1.5 +1.25 +1.0 +0.75 +0.5 +0.25 ±0

-0.25 -0.5 -0.75 -1.0 -1.25 -1.5 -1.75 -2.0

[~ Camera Setup]

[Iris]

[Mode]

[Manual]

[~ Camera Setup]

[AE Shift]

[±0]

COPY

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 213 214

No comments

Canon C100 Instruction Manual Page 66