Canon EOS C300 Specifications download pdf (Page 103)

103

Recording GPS Information (Geotagging)

When the optional GP-E1 GPS Receiver is attached to the camcorder’s WFT terminal, the camcorder will

automatically record the GPS information (latitude, longitude and altitude) in the metadata of each clip recorded

(A 96). For details about attaching and configuring the receiver, refer to the GP-E1’s instruction manual.

Attaching the GPS Receiver

Turn off the camcorder and attach the optional GP-E1 GPS Receiver to the camcorder’s WFT terminal.

Activating the GPS Receiver

1 Open the GPS [Setting] submenu.

[w Other Functions] > [GPS] > [Setting]

2 Select [On] and then press SET.

• The icon appears on the right of the screen and will blink as the

receiver tries to acquire satellite signals.

• When satellite signals are correctly acquired, the icon will stay

continuously on. GPS functions will be activated and clips recorded

thereafter will be geotagged.

IMPORTANT

• In certain countries/regions, the use of GPS may be restricted. Be sure to use the GPS receiver in accordance

with local laws and regulations of the country/region where the receiver is used. Be particularly careful when

traveling outside of your home country.

• Be careful about using the GPS receiver in places where the use of electronic devices is restricted.

Operating modes:

햲

햳

햷

햴

햵

햶

[w Other Functions]

[GPS]

[Setting]

[Off]

Adjusting the Date/Time Automatically According to GPS Position

Setting the [w Other Functions] > [GPS] > [Auto Time Setting] to [On], you can have the camcorder

automatically adjust its date and time settings according to the information received from the GPS signal while

an optional GP-E1 GPS Receiver is attached to the camcorder.

COPY

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 201 202

No comments

Canon EOS C300 Specifications Page 103