Canon HV10 User Manual download pdf (Page 61)

Connecting to a TV or VCR

External Connections

61

E

Copyright Signals

During playback: If you try to play back a

tape that contains copyright control signals

for protection of software, “COPYRIGHT

PROTECTED PLAYBACK IS

RESTRICTED” appears for a few seconds

and the camcorder displays a blank blue

screen. You cannot playback the contents of

the tape.

During recording: If you try to record from

software that contains copyright control

signals for protection of software,

“COPYRIGHT PROTECTED DUBBING

RESTRICTED” appears. You cannot record

the contents of the software.

You cannot record copyright protection

signals to a tape using this camcorder.

Analog/Digital Conversion

Using the camcorder you can convert

analog video signals (for example from a

VCR) to digital signals (DV standard only)

and output them to a digital recording

device.

Connecting

Connect the camcorder to the video input

source using an analog connection

–connection types or

( 55)– shown

in the previous section

Connection

Diagrams

.

Connect the camcorder to the recording

device using the digital connection

–connection type

( 55)– shown in the

same section.

Converting the Video

1 Set [AV DV] to [ ON] ( 31).

2 Start the playback on the video

source and the recording on the

recording device.

Refer to the instruction manuals of the

connected devices.

IMPORTANT

Depending on the signal sent from the

connected device, the conversion from analog

to digital signals might not work properly (e.g.,

signals that include copyright protective signals

or anomalous signals such as ghost signals).

When connecting to a TV/VCR with a SCART

terminal –connection type ( 55)–, use a

SCART adapter with input capability

(commercially available). The supplied PC-A10

SCART Adapter is for output only.

Usually, leave [AV DV] set to the default

setting [ OFF]. While it is set to [ ON]

you cannot connect video input signals to the

camcorder using the HDV/DV terminal.

NOTES

We recommend powering the camcorder

using the compact power adapter.

You can also use the analog/digital

conversion to transfer analog video recordings

to a computer as digital video. The required

equipment and operation is the same as

described in

Transferring Video Recordings

( 63) except in this case you need to set

[AV DV] to [ ON] before connecting the

camcorder to the computer. Note that the

analog/digital conversion may not work

correctly depending on the software and the

specifications/settings of the computer.

MENU

(20)

3 4

2

4

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 88 89

Comments to this Manuals

No comments