Canon XA20 User Manual download pdf (Page 54)

Focus Adjustment

3 Use Touch AF or turn the focus/zoom ring to obtain the desired focus position.

4 Touch [SET] to set the preset focus position.

5 After adjusting the focus, touch [ON] to return to the preset focus position.

• Touch [SET] again to cancel the current preset focus position.

• [ON] will be grayed out while adjusting the focus or zoom.

• You can use the q > [Focus Preset Speed] setting to adjust the speed at which the

camcorder returns to the preset focus position.

NOTES

• The preset focus position will be canceled when the camcorder is turned off.

Peaking

When peaking is activated, the edges of objects in focus will be highlighted in red, blue or yellow on

the screen. In addition, you can choose to switch the screen to black & white, further emphasizing the

edges.

1 Open the focus controls.

[FUNC.] > [< Focus]

2Touch [w].

For the black & white setting: Touch [Off] or [On]

For the peaking color: Touch [Red], [Blue] or [Yellow]

3Touch [K].

4Touch [O].

• Peaking is activated and edges are highlighted. You can turn the focus/zoom ring on this screen

or touch [X] to hide the focus controls.

•Touch [O] again to turn off the peaking effect.

NOTES

• The peaking effect and black & white picture will not appear in your recordings.

Autofocus

When autofocus is activated, the camcorder continuously adjusts the focus on the subject in the

center of the screen. The focusing range is 1 cm (at full wide-angle, measured from the front of the

lens barrel) to G and 60 cm (throughout the zoom range, measured from the front of the lens barrel)

to G. Perform the following procedure to set the autofocus speed.

Operating modes:

COPY

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 183 184

No comments

Canon XA20 User Manual Page 54