Canon 3000 V User Manual download pdf (Page 15)

Loading and Unloading Film

Loading Film

After you load the film, the camera first winds the entire roll onto the

camera's take-up spool. With DX-coded film, the camera

automatically sets the film's ISO speed. Then each time a picture is m

taken, one frame of film is rewound back into the film cartridge. The |

frame counter shows always number of shots remaining.

* •

Turn the Mode Dial to any

setting except <QU9>.

^ Open the back cover.

• Slide down the back cover release

lever and open the back.

Insert the film cartridge at a

slight angle.

Align the film leader edge with

the < A> mark.

• Hold down the film cartridge while

pulling out the film leader. If you

pull out the film leader loo much,

rewind it back into the film

cartridge.

^ Close the back cover.

Close the back cover until it snaps

shut.

► Film prewind will start and there will

be a shutter-release sound about

10 sec. later. The < @ > icon and

frame count will also be displayed

on the LCD panel.

► During the film prewind, the ISO

speed will be displayed oh the LCD

panel.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

No comments

Canon 3000 V User Manual Page 15