Canon EOS 10D User Manual Page 124

  • Download
  • Add to my manuals
  • Print
  • Page
    / 183
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 123
124
Connect the Camera to the Printer
Connecting to a Canon BJ Printer
To connect the camera and printer with the necessary cable, refer to the manuals that came
with the printer.
Follow steps 1 to 3 in “Connecting to a
Card Photo Printer” to connect the
camera to the BJ printer. (p.123)
1
Turn the camera’s < > switch to < >,
then press the < > button.
s
An image in the CF card will be displayed.
2
Turn on the printer.
Press the printer’s power button to turn it on.
s
The < > icon will appear on the camera’s LCD
monitor.
s
The < > icon will appear on the printer’s operation
panel.
3
To disconnect the cable from the camera and printer, follow the procedure below:
1. Turn off the camera.
2. Disconnect the cable from the printer.
3. Disconnect the cable from the camera.
When you disconnect the camera from the printer, the < > icon or < > icon will
disappear from the camera’s LCD monitor and the camera will return to normal
playback.
Even while the camera is connected to the printer, you can instantly switch to
shooting by pressing the shutter button halfway (except during actual printing).
When disconnecting the cable from the camera’s < > terminal, be sure to grasp
the plug instead of the cord to pull it out.
Do not use any cable other than the dedicated interface cable to connect the camera
and printer.
BJ printer-connected icon
To BJ printer
Page view 123
1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 182 183

Comments to this Manuals

No comments