Canon REALiS X600 User Manual download pdf (Page 60)

User Command Specifications 9. Details of command IMAGEFLIP

IMAGEFLIP

IMAGEFLIP=<Image flip setting parameters ：ＩＤ>

Image flip setting parameters

Flip horizontally

Flip vertically

Flip horizontally and verticall

-1

A "busy" response is given while the zoom or focus lens is being driven.

-2

[Display settings] - [Flip display]

-3

-4

Setting

> IMAGEFLIP=REAR

< i:OK

Reference

> GET IMAGEFLIP or ?IMAGEFLIP This retrieves the flip display state.

< g:IMAGEFLIP=REAR_CEILING

Acquisition of parameters which can be set

> RANGE IMAGEFLIP

* Commands are indicated by ">", and responses are indicated by "<".

Supported Command State

OFF ON PM

× ○ ×

* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.

* "i:BUSY" may be returned if the power status is being switched.

Model

SX50

SX6

SX60

X600

○

SX50

r:IMAGEFLIP=I,NONE,CEILING,REAR,REAR_CEILING

Response "i:OK" is returned if the parameter was set properly.

This command is used to flip the screen display in various ways (vertically or horizontally).

CEILING

REAR

Rear ceiling

For details, refer to the RANGE command.

For all other responses, refer to "Error List."

REAR_CEILING

This command is the same as the menu functions in the table below.

The current flip display status can be acquired using the applicable GET command.

Description

It can be executed when the projector is in both the remote mode and power-on status at the

same time.

When the display is flipped, the "keystone distortion" settings are initialized (set to HKS:0,

VKS:0).

Commands

Function

Parameter

Flip displa

Format

Mode Control Setting Reference

Example

01.00** 01.01** 01.01** 01.01**

SX6 SX60 X600

Model Power

Input Mode

Remote Local

Remarks

D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None

SX50

○○○○○○ ––○○ ×

SX6

○○○ ○○ ×○○○○

SX60

X600

○

Remarks

The parameters which can be set at any given point in time can be obtained using the

RANGE command.

Meaning

None

Ceiling

Rear

Paramete

NONE

"NONE," "CEILING," "REAR" or "REAR

CEILING" can be selected as the flip

display setting.

Command

supported

(Refer to the ZCONTDRV command and FCONTDRV command.)

For details, refer to the GET command.

This displays the image backwards (flip

vertically) on the screen.

○○○

PAGE 52

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 189 190

Comments to this Manuals

No comments

Canon REALiS X600 User Manual Page 60

Comments to this Manuals

Related products and manuals for Data projectors Canon REALiS X600