Canon WUX6000 User Manual download pdf (Page 170)

Completing Projector Settings

170

Initializing Network

Settings

> [Network settings] > [Detailed

settings] >

[Network setting

initialization]

You can initialize the projector

network settings.

When [Network setting initialization] is

selected, the window shown below

appears. Select [Yes] then press the

OK button.

• The following items are initialized.

- Settings used for web login, such as the

network setting screen, user name,

password, and other settings

- Network password setting

- Network function

- Network standby settings

- Register network password

- PJLink

- DHCP

- IP address

- Subnet mask

- Gateway address

- E-mail sender address

- E-mail recipient address

- Projector name

- Comments

- AMX Device Discovery settings

- Crestron RoomView settings

Specifying PJLink

Settings

> [Network settings] > [PJLink]

You can enable or disable the PJLink

network function of the projector.

When the function is turned on,

control is possible via the LAN using

commands that meet PJLink

standards.

Press the OK button to accept your

setting and then press the MENU

button.

• [On] is the factory default.

• This projector conforms to Class 1 as

defined in the PJLink standards of the

JBMIA (Japan Business Machine and

Information System Industries Association).

This projector supports all commands that

are defined by PJLink Class 1, and has

been verified as conforming to the PJLink

standard Class 1 definition.

• For information about using PJLink, refer to

“Setting PJLink [PJLink]” (P187).

Off Disables the PJLink function.

On Enables the PJLink function.

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 235 236

Comments to this Manuals

No comments