Canon VB-C300 User Manual download pdf (Page 30)

2-6

Connect the Camera to the Network and Perform the Initial Setting

The network connection is now complete.

 When using external power supply

When using external power supply, use the Power

Connector (→ P.vi) supplied with the camera as shown

to the right.

Supply 12VDC or 24VAC from a power supply

insulated from 100-240VAC supply. You can connect

12VDC power supply without regard to the polarity.

When using an external power supply, make sure that

the voltage falls within the ranges below.

AC24V: Voltage fluctuation within AC24V±10%

Current supply capability over 1.0A per camera

DC12V: Voltage fluctuation within DC12V±10%

Current supply capability over 1.5A per camera

* If using a DC12V battery power source, make sure to use the DC12V by connecting a resistor

that is between 0.5 and 1.0Ω, and over 20W in series to the power supply line.

Recommended power supply cables for VB-C300 [for reference]

Cable (AWG) #24 #22 #20 #18 #16

Conductor diameter (0.52mm) (0.65mm) (0.82mm) (1.03mm) (1.30mm)

(ømm)

(0.020inch) (0.026inch) (0.032inch) (0.041inch) (0.051inch)

12VDC

Maximum cable length (m)

5 9 14 23 32

Maximum cable length (ft)

16.4

29.5 45.9 75.4 105.0

24VAC

Maximum cable length (m)

11 18 29 46 64

Maximum cable length (ft)

36.1 59.0 95.1 151.0 210.0

Use a UL cable (equivalent to UL-1015) as the power cable for 12VDC or 24VAC.

Note

● The camera head position is automatically initialized when the power supply is

turned ON.

● Never touch the camera head while its position is being initialized. If you touch it,

the head position may not be initialized correctly, or other malfunctions may result.

● Wait at least 5 seconds before turning the power back on after shutting it off. Turning

it on too quickly may result in a malfunction. Observe the precautions given in

“Safe Use of Equipment/IMPORTANT SAFETY INSTRUCTIONS (→ P.viii, x), “Safe

Use of Equipment/When using the camera with PoE HUB (→ P.xii) when plugging

and unplugging the power cable.

● Read the manual of the PoE HUB for how to power it ON or OFF.

● You can connect the AC adapter (optional) to the camera while it is powered from the

PoE HUB. In this case, the PoE-supplied power is used while it is active, and the

power from the AC adapter (optional) is not used. When the PoE-supplied power is

disconnected, the power supply automatically switches to the AC adapter (optional).

Stripping length

approx. 4mm - 6mm

(0.16inch - 0.24inch)

Screwdriver

Power

Connector

(Supplied)

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 53 54

Comments to this Manuals

No comments

Canon VB-C300 User Manual Page 30

Comments to this Manuals

Related products and manuals for Furniture Canon VB-C300