Canon VB-C300 User Manual download pdf (Page 42)

2-18

Mounting the Camera at a Flat Location

When Mounting the Camera at Upright Position

Note

● Observe the precautions in “Before Setting Up the Camera” (→ P.2-14) and follow

them before mounting the camera.

● The shooting position of the VB-C300 is set on the assumption that the camera is

mounted at the inverted position. To reverse the camera video image upside down,

see “Setting Image Size, Quality and Camera Control (Video and Camera)” in the

Operation Guide (→ dOperation Guide P.1-8).

Attach the Rubber Feet to the camera. Place the VB-C300 at a flat and stable location.

OUT

13V

/10BT

Using a Tripod

The screw hole for mounting a tripod is on the bottom of the VB-C300 toward the center.

Note

● Do not overtighten the mounting screw.

If excessive force is used to tighten the mounting

screw, camera head movement may be impeded,

or other malfunctions may result.

● Always use a tripod mounting screw that is less

than 5.5 mm (0.22 in.) in length. The use of screws

5.5 mm (0.22 in.) long or longer could damage the

camera. Also, the tripod seat used should be at

least 30 mm (1.18 in.) in diameter.

30mm

(1.18inch)

or wider

5.5mm

(0.22inch)

or shorter

Tripod

mounting

screw

Setting Up the Camera

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 53 54

No comments

Canon VB-C300 User Manual Page 42