Canon PIXMA mini260 User's Guide Page 67
- Page / 92
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
65Troubleshooting
Printed Surface Is Scratched/Paper Is Smudged
Cause Action
Paper Feed Roller is dirty. If paper is not feeding properly, clean the Paper Feed Rollers.
Cleaning the Paper Feed Rollers will wear the rollers, so perform
this procedure only when necessary.
For details on cleaning, see “Cleaning the Roller (Roller
Cleaning)” of the User’s Guide on-screen manual.
Inside of the printer is dirty. Performing many printings may leave some ink inside the printer,
causing printouts to be smudged. In this case, perform bottom
plate cleaning to clean the inside of the printer. “Cleaning the
Protrusions Inside the Printer“ of the User’s Guide on-screen
manual.
For details on cleaning, see “Cleaning the Interior of the Printer
(Bottom Plate Cleaning)” of the User’s Guide on-screen manual.
Printing on inappropriate type of
paper.
Check to see if the paper you are printing on is not too thick or
curled.
When performing Borderless Printing, print quality may be reduced
at the top and bottom edges of the paper.
Curled paper used If all four corners or the printing surface of the paper is curled,
the paper may become dirty or the paper may not feed properly.
Use the paper after correcting paper curl as follows.
(1) Face up the printing surface
*1
, and cover it with a non-
printing regular paper to avoid damaging the surface.
(2) Roll up the paper in a direction opposite to paper curl as the
figure below.
(3) Check the printing paper if paper curl is corrected within
approximately 2 to 5 mm
*2
.
It is recommended to print the curl-corrected paper one
sheet at a time.
The Paper Thickness Lever
position is incorrect.
Set the Paper Thickness Lever according to the paper to print.
Refer to “Printing Media” of the User’s Guide on-screen manual.
Depending on the printing content, the printing surface may
become scratched even for the types of paper to set the lever to
the right. In this case, set the Paper Thickness Lever to the left.
* Return the Paper Thickness Lever to the right position after
printing. If you do not return the lever, the distance between the
Print Head and printing paper stays broadened and the inside of
the printer will easily get dirty. The image quality also may be
decreased.
(1) (2)
*1
*1
*2
- Photo Printing Guide 1
- Getting Help from Canon 2
- Ordering Information 2
- Safety Precautions 3
- Introduction 4
- Before Printing 5
- 4 Before Printing 6
- Rear View 6
- Interior 6
- 5Before Printing 7
- 6 Before Printing 8
- 1 Display the HOME screen 9
- 2 Select the menu 10
- 9Before Printing 11
- Other Buttons 11
- Turning On/Off the Printer 12
- Loading Printing Paper 13
- 1 Turn on the printer 14
- 4 Load the paper 15
- Using Genuine Media 16
- 14 Before Printing 16
- Using a Memory Card 17
- 16 Before Printing 18
- Inserting a Memory Card 18
- 17Before Printing 19
- Removing a Memory Card 19
- Printing from the Memory Card 20
- 5 Start printing 21
- 1 Prepare to print 22
- 5 Select the paste method 22
- 6 Paste photos one by one 23
- 7 Start printing 23
- 4 Select the photo to print 24
- 5 Select a frame 24
- 6 Start printing 24
- Print Setting Screens 25
- Using Useful Functions 26
- Other Useful Functions 28
- 1 Set the search method 29
- 2 Set the search method 29
- 3 Specify a date range 30
- 1 Select the photo to trim 30
- 4 Finalize the trimmed area 31
- Digital Camera 33
- Communication Device 38
- 2 Load the paper 40
- Printing Maintenance 44
- 2 Start Print Head Cleaning 46
- 2 Print the Pattern 48
- Replacing an Ink Tank 49
- 48 Printing Maintenance 50
- Replacing an Ink Tank 50
- 2 Open the Printer Cover 51
- 3 Remove the empty ink tank 52
- 5 Insert the ink tank 53
- 6 Close the Printer Cover 53
- Changing the Printer Settings 54
- Print settings 55
- Wireless print settings 55
- Bluetooth settings 55
- PictBridge settings 55
- Other settings 55
- Language selection 56
- Reset setting 56
- Save settings 56
- Load settings 56
- Troubleshooting 57
- 56 Troubleshooting 58
- 57Troubleshooting 59
- 58 Troubleshooting 60
- 59Troubleshooting 61
- LCD Cannot Be Seen at all 62
- 61Troubleshooting 63
- 62 Troubleshooting 64
- 63Troubleshooting 65
- Cannot Print to End of Job 65
- Colors Are Unclear 65
- 64 Troubleshooting 66
- White Streaks 66
- 65Troubleshooting 67
- 66 Troubleshooting 68
- Printing Does Not Start 68
- Paper Does Not Feed Properly 69
- Paper Jams 70
- Flash Alternately 71
- 70 Troubleshooting 72
- Communication 73
- 72 Troubleshooting 74
- Appendix 75
- 74 Appendix 76
- About Option 77
- Specifications 78
- 77Appendix 79
- 78 Appendix 80
- 80 Appendix 82
- Russia only 83
- Regulatory Information 84
- For California, USA only 84
- 83Appendix 85
- 84 Appendix 86
- 85Appendix 87
Related products and manuals for Ink cartridges Canon PIXMA mini260
Ink cartridges Canon IP4200 User Manual
(4 pages)
(4 pages)
Ink cartridges Canon BX3 Datasheet
(8 pages)
(8 pages)
Ink cartridges Canon CAN22202 Datasheet
(8 pages)
(8 pages)
Ink cartridges Canon CAN22200 Datasheet
(8 pages)
(8 pages)
Ink cartridges Canon DR-6080 User Manual
(22 pages)
(22 pages)
Ink cartridges Canon PIXMA MP830 User's Guide
(222 pages)
(222 pages)
Ink cartridges Canon PIXMA MX850 Specifications
(188 pages)
(188 pages)
(42 pages)© 2020, manymanuals.com. All rights reserved. | 0.711 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals