Canon PIXMA iP5200R Setup Guide download pdf (Page 30)

Turn on the printer.

If the printer is recognized, the next screen will appear

automatically.

Perform print head alignment before

you start using your printer.

See “Aligning the Print Head” on page 30.

When a message asking for your confirmation to restart

your computer appears on the screen, click OK.

Setting Up an Additional Computer to Use a Printer

Already Connected to a Network

This section describes how to enable a client to use a printer that is already connected to a wireless or wired

LAN (setup from another computer is complete). This setup procedure only requires settings to be made on

the client computer.

Perform this setup procedure after installing the software.

Turn on the printer.

If the connection is not recognized, click Help and

follow its instructions.

• If MAC or IP address filtering is configured to restrict access to the printer, make sure beforehand

that the details of the client computer you are setting up are also registered.

To do this, use the Canon IJ Network Tool on a computer that is already set up.

• Make sure the computer you are setting up is NOT connected to the printer via a USB cable. This

setup procedure does not involve connecting the USB cable.

• For wired LAN connections, confirm that the printer is connected to the network with a LAN cable.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 75 76

No comments

Canon PIXMA iP5200R Setup Guide Page 30