Canon DR-2510M User Manual download pdf (Page 90)

Back Previous Page Next Page

Contents

Under Mac OS X

Switch to Advanced Mode and click [More].

Under [Feeding Option], select the document feeding method.

NOTE

• Details of each feeding method are indicated below.

[Standard Feeding]

This feeding method is good for scanning small batches of documents that are

loaded one batch at a time: scanning stops when the loaded documents have

been scanned.

[Panel Feeding]

This feeding method is good for scanning batches of documents of different

sizes: after loading the documents, press the Job button (assigned as a Start

button on the scanner) to start scanning, and press the assigned Stop button to

stop scanning.

y When scanning documents with different-size pages, after loading the

documents, you can adjust the document guide position.

[Automatic Feeding]

This feeding method is good for scanning batches of same-size documents:

scanning starts when the scanner detects loaded documents, and stops when

you press the Stop button.

y When [Automatic Feeding] is selected, the [Setting] button is enabled to

allow setting the delay time from when a loaded document is detected until

scanning starts. The delay time can be set from 0 to 60 seconds.

Batch Separation

When the separation timing to use when scanning starts with batch separation

enabled in the application. (If [Standard Feeding] is selected, batch separation

is disabled.)

This item is available only under Windows when the scanner driver was called

from an ISIS compatible application.

If you selected [Panel Feeding] or [Automatic Feeding] for the feeding method:

[Auto]

Document batches are separated automatically.

[Panel]

Document batches are separated when the [Batch Separation] button on the

Scan Panel is pressed. (See "Using the Scan Panel," on p. 55.)

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 117 118

No comments

Canon DR-2510M User Manual Page 90