Canon Pixma iP4300 User Manual download pdf (Page 17)

13Before Printing

z Loading Paper in the Auto Sheet Feeder

1 Flatten the four corners of the paper before loading it.

2 Prepare to load paper.

(1) Open the Paper Support and pull out the Paper

Support Extension to support the paper.

(2) Press the Open Button to open the Paper

Output Tray.

(3) Pull out the Paper Output Tray Extension

completely.

(4) Press the Paper Feed Switch so that the Auto

Sheet Feeder lamp (A) lights.

Note

z Align the edges of paper neatly before loading. Loading paper without aligning the edges may

cause paper jams.

z If paper is curled, hold the opposing curled corners and gently bend them in the opposite

direction until the paper becomes completely flat. See “Paper is curled.” on page 68.

z To avoid curling, handle paper as follows.

– Put unused paper back into the package and keep them on a level surface.

– Take out only the necessary number of sheets from the package, just before printing.

Note

When closing the Paper Output Tray Extension after

printing, lift it up slightly.

Note

You can also select the paper source with the printer

driver.

For details, refer to the Printer Driver Guide on-screen

manual.

(1)

(2)

(3)

(4)(A)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 101 102

No comments

Canon Pixma iP4300 User Manual Page 17