Canon imagePROGRAF iPF8300 Setup Guide

1Setup GuideENGIntroductory InformationQT5-2394-V1 ©CANON INC. 2010 Printed in JAPANIntroductionOverview of Setup These are the steps in printer inst

10When entering the printer's IP address manually• If the printer is already connected to the network, confirm the IP address assigned to the pri

11Macintosh2Make sure the printer is on. Turn the computer on.Connect the printer to a computer Connect the cableUse a cable to connect the printer to

126Click Next. 7After reading the software license agreement, click Continue. 8Click Agree. 9Click Continue. 10Exit other applications and click Conti

13Follow these steps to load the provided sample paper for printhead adjustment.Load Paper to Adjust the Printheads20Double-click the iPFxxxx Manual

144Raise the holder stopper lever (a) from the shaft side to unlock the stopper. While holding the holder stopper in the position in the figure indica

15Store Printed Manuals in the Pocket10While holding the leading edge of the paper roll, raise the release lever.11Holding the leading edge of the pap

16Responding to MessagesError messages may appear on the display screen of the control panel during printer installation. If so, it may not indicate a

2PreparationsPrepare the printer for use by installing it and connecting the power cord.1Install the printer.Assemble the stand and install the printe

3Install both printheads.Install the Printheads1Press the Power button to turn on the printer.2When the following screen appears, use the ▲ and ▼ keys

4Install the Ink TanksLoad all 12 ink tanks.13Repeat steps 6 to 12 to install the second printhead set.14Pull the carriage cover forward.15Close the t

5Install the Printer Driver and the User Manual• Use a USB cable that conforms to the Hi-Speed USB specification.• Connect the USB cable to the printe

66In the Printer Selection window, select The printer is connected directly to a computer and click Next.7In the Printer Installation dialog box, sele

72Make sure the printer is on. Turn the computer on and insert the provided User Software CD-ROM for your operating system in the CD-ROM drive. 3In th

810In the Method of Configuring IP Addresses window, enter the IP address in Configure manually, under Method of Configuring IP Addresses. Click Insta

9If the printer is already connected to the network• If the printer is already connected to the network, confirm the IP address assigned to the printe