Canon imagePROGRAF iPF8300 Setup Guide download pdf (Page 2)

Preparations

Prepare the printer for use by installing it and connecting the power cord.

Install the printer.

Assemble the stand and install the printer

referring to the Printer Stand Setup

Guide included with the stand.

Remove the tape and other packing

materials attached to the printer.

Open the top cover.

Use the Allen wrench to loosen the screw of the belt stopper (a) and then remove the screw

from the belt stopper. Rotate the belt stopper to the left to remove it. Pull the carriage spacer (b)

in the direction indicated by the arrow to remove it.

• The belt stopper, screw, carriage

spacer, and Allen wrench are needed if

the printer is moved to another location.

Keep the belt stopper, screw, carriage

spacer and Allen wrench in a safe

place.

Neglecting to attach the belt stopper

and carriage spacer when moving the

printer to another location can result in

damage to the printer.

Lift the ejection guide.

Attach the four ejection supports (a) to the

back of the ejection guide.

Close the ejection guide and the top

cover.

Plug the power cord into the power supply

connector on the back of the printer and

plug the other end into an electric outlet.

1 2 3 4 5 6 7 ... 15 16

No comments

Canon imagePROGRAF iPF8300 Setup Guide Page 2