Canon iPF750 Basic Guide download pdf (Page 5)

Troubleshooting

Problems with the Printing Quality

Phenomenon

Printing is faint

You may be printing on the wrong

side of the paper.

The ink was not dry when paper

was cut.

The Printhead nozzles are

clogged.

Because the printer was left

without ink tanks installed for some

time, ink has become clogged in

the ink supply system.

Paper is jammed inside the Top

Cover .

Printing may be faint if Print

Quality in Advanced Settings

in the printer driver is set to

Standard or Draft .

Print on the printing surface.

Close the Top Cover .

Specify a longer drying period in the Control Panel

menu, in Paper Details > Roll DryingTime .

Print a test pattern to check the nozzles and see if

they are clogged.

After the ink tanks have been installed for 24 hours,

run Head Cleaning B from the Control Panel .

Follow the steps below to remove the jammed piece

of paper inside the Top Cover .

Open the Top Cover and make sure the Carriage

is not over the Platen .

Remove any scraps of paper inside the Top Cover .

In Advanced Settings of the printer driver, choose

Highest or High in Print Quality .

Cause Corrective Action

(→"Checking for Nozzle Clogging," User Manual)

(→

, If Printing is Faint)

(→

, Menu Map)

Printing in Draft or Standard mode is faster and

consumes less ink than in Highest or High modes,

but the printing quality is lower.

(→"Giving Priority to Particular Graphic Elements and

Colors for Printing," User Manual)

(→

, If Roll Paper Jams)

(→

, If a Sheet Jams)

1 2 3 4 5 6 7 8 9 10 ... 51 52

Comments to this Manuals

No comments

Canon iPF750 Basic Guide Page 5

Comments to this Manuals

Related products and manuals for Print & Scan Canon iPF750