Canon LV-8235 User Manual download pdf (Page 20)

Adjustment

Adjust the forward/backward slide

(Adjustable range: 0 - 180 mm)

¡ Loosen the four bolts on the top of the adjustment

unit using a hexagon wrench (3 mm) and adjust the

slider of the adjustment unit. After the adjustment,

tighten the four bolts which were loosened.

Adjust the vertical slide (Adjustable range: +4° - –2°)

¡ Remove the left and right cover plates of the wall plate.

¡ Loosen the four bolts A located inside the setting plate using a hexagon wrench (6 mm).

¡ Adjust the vertical slide with the two bolts B located inside the setting plate using a hexagon wrench (6 mm)

(Adjust the left and right bolts so that their ends touch equally against the wall plate.)

¡ Tighten the four bolts A which were loosened using the hexagon wrench (6 mm).

¡ After adjustment, attach the left and right cover plates again.

Adjust the horizontal rotation (Adjustable range: +5° - –5°)

¡ Loosen the two bolts A located on the top of the adjustment unit using a hexagon wrench (3 mm) so that

adjustment can be carried out.

¡ Turn the adjustment knob B located on the left side of the adjustment unit to adjust the horizontal rotation.

¡ Tighten the two bolts A which were loosened using the hexagon wrench (3 mm).

* “A” marks appear on the setting plate to indicate the locations of the bolts and adjustment knob.

Bolts A

Adjustment knob B

Bolts B

Bolts A

4°

2°

Bolts x 4

0 - 7.09 inches

(0 - 180 mm)

5°

■ Installation Procedure

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

No comments

Canon LV-8235 User Manual Page 20