Canon REALiS SX60 User Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 146
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
3
AV Equipment
1. Install the projector. P32-33
z Install the projector at the desired distance from the screen.
z Install batteries in the remote control (P29)
2. Connect the projector. P64-68
z Connect the projector and the AV equipment with a cable* (see P38, 39 for the
instruction on connecting a audio cable).
3. Turn on the projector. P40-41
z Connect the power cord and turn on the projector.
z Adjust the height of the projecting image (P43).
z Select a display language when turning on the projector for the first time (P41).
4. Press the button twice. P46-47
z Adjust the focus of the screen.
5. Set up the AV equipment.
z Turn on the AV equipment and play the video image.
6. Select the input signal by pressing the button. P70-72
z Select DIGITAL VIDEO as the input signal for a digital video image.*
For the other video image, go to step 7.
7. Press the button twice again. P70
z Adjust the input signal, focusing, keystone distortion, etc. automatically with the
auto setup function.
8. Select the image mode with the button. P55-56
z Select an appropriate image mode for projection.
z Specify the aspect ratio or display area in the [Aspect] menu as required (P73,
90, 91).
Turn off the projector P60-61
z Turn off the projector and unplug the power cord.
* Connect the projector and the AV equipment with a HDMI/DVI cable to project a digital video
image (P65).
Finishing the projection...
Page view 2
1 2 3 4 5 6 7 8 ... 145 146

Comments to this Manuals

No comments