Canon XF305 Instruction Manual download pdf (Page 121)

121

Customization

Custom Picture Settings

Sharpness

Sets the sharpness of the output and recording signal.

[Level]: Sets the sharpness level. This setting can be adjusted

from -10 to 50. (Default: 0)

[H Detail Freq.]: Sets the center frequency of horizontal sharpness.

Setting higher values increases the frequency, which, in

turn, increases the sharpness. This setting can be

adjusted from -8 to 8. (Default: 0)

[Coring]: Reduces noise artifacts caused by high sharpness levels.

[Level]: Sets the coring level. Higher values prevent sharpness from

being applied to minute details, resulting in less noise. This setting can

be adjusted from -30 to 50. (Default: 0)

[D-Ofst]: You can use [D-Ofst], [D-Curve] and [D-Depth] to adjust the

coring level based on brightness. [D-Ofst] sets the coring level of the

minimum brightness level. This setting can be adjusted from 0 to 50.

(Default: 0)

[D-Curve]:

Sets the curve of the coring adjustment. This curve is the

change from [Level] to [D-Ofst]. This setting can be adjusted from 0 to 8.

(Default: 0)

[D-Depth]: Sets a multiplier to [D-Ofst] that determines the coring level

adjustment based on brightness. Positive values raise the coring level

in dark areas and negative values lower the level. This setting can be

adjusted from -4 to 4. (Default: 0)

[HV Detail Bal.]: Adjusts the ratio between horizontal and vertical detail.

Higher values emphasize vertical detail while lower values

emphasize horizontal detail. This setting can be adjusted

from -8 to 8. (Default: 0)

[Limit]: Restricts how much sharpness is applied. This setting

can be adjusted from -50 to 50. (Default: 0)

Input

Output

Input

Output

Knee Slope Knee Point

COPY

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 210 211

No comments

Canon XF305 Instruction Manual Page 121