Canon DR-3080C User Manual download pdf (Page 54)

50 Troubleshooting

Cause The scanner's SCSI ID is identical to the SCSI ID of

another device.

Action Check the SCSI IDs of all SCSI devices connected to the system

and set a unique SCSI ID for the scanner.

Cause The terminator is not set correctly.

Action Connect a terminator to the SCSI device that is at the end of the

SCSI daisy chain. If the SCSI device has a built-in terminator

function, enable the terminator.

Cause The PC was turned on before the scanner.

Action Shut down both the PC and the scanner, and then turn the scanner

back on, followed by the PC.

Cause The scanner is not on.

Action Refer to the previous section, "The scanner does not turn on," and

check to see if the scanner is on. If the scanner is not on, shut

down the PC, then turn the scanner on first, and then the PC.

Cause The SCSI host adapter is not compatible with the scanner.

Action Use a SCSI host adapter that is compatible with the scanner

driver and your application software.

Cause In Windows NT 4.0 Workstation, Windows 2000

Professional or Windows XP, the ASPI manager has not

been installed correctly.

Action Following the instructions in the SCSI host adapter instruction

manual, install the ASPI manager and then start up the ASPI

manager.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

No comments

Canon DR-3080C User Manual Page 54