Canon VB-M640VE User Manual download pdf (Page 96)

Settings for uploading video via HTTP or FTP when an event is triggered.

Use [Server] > [Server Settings] (P. 89) to configure HTTP server and FTP server settings for uploading.

Video Record Setting

When an event is triggered, sets whether to upload camera video with HTTP or FTP or to record the video to a memory card.

These can also be set with the [Memory Card] submenu (P. 101) and will be reflected in [Video Record Setting] here.

[Video Record Action]

Select [Upload] to upload video.

General Upload

Sets the upload method and video format for upload.

HTTP and FTP Upload Settings

[Video Record] > [Upload]

Important

• The following settings are necessary to use the upload function or recording to the memory card.

– [Video Record] settings configured with [Timer] in the [Event] menu.

– [Video Record] settings configured with each of the [Event] menus ([External Device], [Audio Detection] and [Linked Events]).

– The setting in the [Event] tab of the Intelligent Function Setting Tool (P. 227).

• When using the upload function, or recording to the memory card, do not change the settings in the [Setting Page]. Doing so may

result in the upload function or the recording to memory card to stop.

• If you are using HTTP or FTP upload, and e-mail notification by text and video, set [Video Settings] > [JPEG] > [Video Size: Upload /

Memory card] (P. 73) to a small size.

• HTTP upload does not support SSL/TLS.

• If the camera is set to upload or send e-mail notification continuously, not all video or e-mails may be sent depending on the video size

and the network condition to the server. If this occurs, a message is written to the log (P. 134).

• If the destination for HTTP or FTP upload, or e-mail notification is set for a Windows operating system, IPsec communication is not

supported.

R11

M641

M741

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 286 287

No comments

Canon VB-M640VE User Manual Page 96