Quick Start GuideQuick Start GuideSetup and ScanningTry the Additional FeaturesCheck the Package ContentsInstall the SoftwareWindowsMacintoshUnlock th
83 Click the Acquire icon or click the [File] menu and select [Acquire].ScanGear CS will start.If an error message appears, click the [File] menu, c
9Try Scanning7 Click [Scan].The final scan will start. 8 Click or (close box) in the ScanGear CS window to close it.The scanned image will appear
10Using the Scanner ButtonsYou can use the four convenient buttons on the front of the scanner to scan and perform related tasks easily with a single
11Scanning Film (for CanoScan 5000F)You can scan 35 mm film (a film strip or slides) with this scanner.Positioning the Film Use the following procedur
12Scanning Film (for CanoScan 5000F)3 Place the loaded film guide on the scanner platen.Up to three frames in a film strip can be scanned at once. Pos
13Scanning Film (for CanoScan 5000F)Simple Mode 3 In the [Select source] category, select [Film].4 In the [Film type] category, select [Nega/Sleeve]
14Scanning Film (for CanoScan 5000F)5 Click [Preview].6 Place a check mark beside the number(s) of the frame(s) to be scanned and click [Scan].At firs
15System InformationThis form should be used to record the operating environment for the purchased scanner. If any problems occur with the scanner, yo
Specifications*1 Available only when scanning films.*2 USB 2.0 Hi-Speed mode. Transfer time to computer is not included.*3 Calibration processing time
CANON INC.30-2, Shimomaruko 3-chome, Ohta-kuTokyo 146-8501, JapanCANON U.S.A., INC.Digital Home and Personal Systems Division2995 Redhill Avenue, Cost
• CanoScan and ScanGear are trademarks of Canon Inc.• Adobe®and Acrobat® are trademarks of Adobe Systems Incorporated. • Microsoft and Windows are reg
1Guide to the ManualsOpen the PackageQuick Start Guide (this guide)This guide describes a series of processes, from opening the package to using the s
2Check the Package ContentsScanner and AccessoriesDocuments and Software Programs• Quick Start Guide (this guide)• Additional Documents• CanoScan Setu
3Install the Software (Windows)1 Turn the computer on.2 Place the CanoScan Setup Utility CD-ROM in the drive.The CanoScan Setup Utility main menu will
4Install the Software (Macintosh)1 Turn the computer on. 2 Place the CanoScan Setup Utility CD-ROM in the drive.The CanoScan Setup Utility main menu w
5Unlock the Scanning Unit1 Open the document cover and peel the seals from the scanner.2 Push the lock switch toward the unlock mark ( ). • Unlock the
6Connect the Scanner1 Peel the caution seal from the back of the scanner.2 Connect the FAU cable to the scanner (CanoScan 5000F only).3 Connect the sc
7Try Scanning The following steps explain how to scan with ArcSoft PhotoStudio.1 Place a photo or a picture on the glass by aligning its top edge with
Comments to this Manuals