Canon CanoScan 4200F User Manual Page 1

1EnglishSetup and ScanningTry the Additional FeaturesCheck the Package ContentsInstall the SoftwareUnlock the Scanning UnitConnect the ScannerTry Scan

Using the Scanner Buttons10Using the Scanner ButtonsYou can use the four convenient buttons on the front of the scanner to scan and perform related ta

Scanning Film11EnglishScanning FilmYou can scan 35 mm film (film strip or slides) with this scanner.Positioning the Film Use the following procedures

Scanning Film123 Insert a fingernail into the slot in the Film Guide and open the Film Holder.4 Insert the film into the Film Guide. Place the film fa

Scanning Film13English5 Return the Film Guide to the document cover.Hold the document cover and c insert the bottom edge of the Film Guide into the bo

Scanning Film14Scanning FilmThe following steps explain how to scan the film with ArcSoft PhotoStudio.1 Start ArcSoft PhotoStudio.Refer to step 2 on p

Scanning Film15English7 Select the [Output Size].You can select from the following options.• If you selected [Print ] in Step 6, you can select Flexib

Specifications16Specifications*1 16 bit output supported for film scanning only.*2 The fastest speed in USB 2.0 Hi-Speed mode on Windows PC. Transfer

System Information17EnglishSystem InformationThis form should be used to record the operating environment for the purchased scanner. If any problems o

Guide to the Manuals2Guide to the Manuals• CanoScan and ScanGear are trademarks of Canon Inc.• Adobe and Acrobat are trademarks of Adobe Systems Incor

Check the Package Contents3EnglishCheck the Package ContentsScanner and AccessoriesDocuments and Software Programs• Quick Start Guide (this guide)• Ad

Install the Software4Install the Software1 Turn the computer on.2 Place the CanoScan Setup Utility CD-ROM in the drive.After you select your language,

Unlock the Scanning Unit5EnglishUnlock the Scanning Unit1 Peel the seals off the scanner.2 Gently turn the scanner over.3 Slide the lock switch toward

Connect the Scanner6Connect the Scanner1 Connect the scanner to the computer with the supplied USB interface cable.2 Attach the supplied AC adapter to

Try Scanning7EnglishTry Scanning The following steps explain how to scan with ArcSoft PhotoStudio.1 Place a photo or a picture on the glass by alignin

Try Scanning83 Click the [File] menu and choose [Select Source].Select your scanner model name and click the [Select] button .4 Click the Acquire icon

Try Scanning9English8 Select the [Output Size].You can select from the following options.• If you selected [Print ] in Step 7, you can select Flexible