Establishing a Wi-Fi Connection with WPS (PIN Mode)
116
7
Specify the PIN code at the
access point.
At the access point, specify the 8-digit
PIN code displayed on the camera’s
LCD monitor.
For instructions on setting PIN codes
at the access point, refer
to the
access point’s instruction ma
nual.
After the PIN code is specified, select
[OK] and press <0>.
8
Connect to the access point.
Select [OK] and press <0> to
establish a Wi-Fi connection with the
access point.
Whe
n a Wi-Fi connection with the
access point is establish
ed, the next
screen is displayed.
9
Select [Auto setting].
Select [OK] and press <0> to
display the setting screen (p.117) for
the Wi-Fi function selected in step 2.
If [Au
to setting] results
in an error or
if you want to specify the settings
manually, see page 161.
The IP address can only be set automatically in environments using DHCP
servers, or access points or routers with DHCP server functionality, such
that the IP addresses, etc. are required to be assigned automatically.
Comments to this Manuals