Canon Vb-C60 - Ptz Network Camera Specifications download pdf (Page 47)

2-7

Step 2 Connect the Camera to the Network

Initial Setting and Installation of Camera

This camera has no power switch.

If the power is supplied to this camera by the PoE via a LAN cable, disconnect and connect the

LAN cable from/to the HUB receiving the power, to turn the power [ON]/[OFF].

If an AC adapter (optional) or external power supply is used, disconnect and connect the power

plug of the AC adapter (optional) or external power supply, to turn the power [ON]/[OFF].

Note

 For details on PoE HUB and Midspan, check with your Canon sales representative.

 For the operating methods and other details of a PoE HUB or Midspan, see the operation

manual or other documentation that comes with the applicable device.

 For the LAN cable connecting the camera and a PoE HUB, use a cable of Category 5 or

higher of a length not more than 100m.

 If the camera is connected to a switching HUB, changing the connection while the camera

is operating may disable communication due to the learning function of the HUB. Do not

change the connection while the camera is operating.

 An AC adapter (optional) can also be connected to the camera while the power is supplied

from a PoE HUB. In this case, the PoE power is given priority while the power is supplied from

the PoE HUB and the power from the AC adapter (optional) is not used. Once the PoE power

is cut off, the power is automatically supplied from the AC adapter (optional).

* Midspan (LAN-cable power supply) is a device that supplies power to the camera via a LAN cable,

just like a PoE HUB.

Tip

When the power is turned on, the camera head position is initialized automatically.

VB-C60

Midspan

(LAN cable power supply device)

PoE HUB

HUB

LAN cable

Max. 100m

COPY

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 75 76

No comments

Canon Vb-C60 - Ptz Network Camera Specifications Page 47