Canon Vb-C60 - Ptz Network Camera Specifications download pdf (Page 58)

2-18

Step 4 Install the Camera

2. Use the bundled template to determine the installation position of the camera.

Determine the positions of mounting screw holes and wiring hole by considering the

orientation of the camera, and mark the positions using a pencil, etc.

3. Drill the mounting screw holes (2 locations) and wiring hole in the ceiling using a drill, etc.

4. Secure the safety wire.

Securely attach the safety wire to an anchor or structure.

After securing the ceiling end, secure the camera end of the safety wire using a screw

supplied with the camera.

Note

If an AC adapter (optional) is used, the wiring hole should be large enough for the ferrite

cores on the cable to pass.

Note

If the ceiling is made of concrete or otherwise the wiring hole cannot be opened, secure the

wiring to an appropriate position.

Camera direction

Distance between screws: 157mm (6.18inch)

Screw holes for M4.0 screws

COPY

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 75 76

No comments

Canon Vb-C60 - Ptz Network Camera Specifications Page 58