Canon Vb-C60 - Ptz Network Camera Specifications download pdf (Page 62)

2-22

Step 4 Install the Camera

2. Determine the installation position of the camera.

Apply the bundled template onto the dome to determine the hole positions for backside

ceiling bracket and in-ceiling bracket, and mark the positions using a pencil, etc.

3. Open in the ceiling the holes (3 locations) for installing the backside ceiling bracket, as well as

a hole for in-ceiling bracket.

4. Install the backside ceiling bracket in the ceiling.

Access from inside the ceiling and insert the projections of the backside ceiling bracket into

the holes opened in step 3.

Note

After the holes have been opened, be careful not to let shavings, etc., enter the dome when

the indoor dome housing is installed.

Tip

It is recommended that the backside ceiling bracket be temporarily secured with double-

sided adhesive tape, etc., so that the backside ceiling bracket will not separate when the

dome is secured later on.

7.0mm

Height

10.0mm

Template bundled with the dome

Camera direction

Backside ceiling bracket

COPY

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 75 76

No comments

Canon Vb-C60 - Ptz Network Camera Specifications Page 62