Canon ZR50MC Instruction Manual download pdf (Page 57)

Using the Full

Range of Features

• If the subject is unsuitable for autofocus ( 142), the camcorder may not

be able to focus, and

may continue to flash white in the display. Continue

to hold the PHOTO button halfway down, then adjust the focus manually

with the selector dial.

• If you are using manual focus ( 79), the

mark starts as a continuous

green mark. Focus with the selector dial.

2. Press the PHOTO button fully down to take the still picture.

• The camcorder takes the image immediately, and then records the “photo” to

the tape for approximately 6 seconds*. During this time the camcorder also

records the sound, and the display shows the still picture.

• A counter display appears, and counts up as the camcorder records the

picture.

disappears from the display.

• The camcorder returns to record pause mode.

Notes:

• The camcorder automatically returns to record pause mode after recording a

still image for approximately 6 seconds*. If you turn the POWER switch to

OFF during that time, the camcorder will respond only after recording is

complete.

• The wireless controller’s PHOTO button has no half-way setting. Press the

button fully and the camcorder immediately takes the “photo”.

• Only take “photos” where it is bright enough to see the image in the display.

* 8 seconds in SP or LP recording mode.

3_ZR50/45MC_E(39-86) 1/9/02 11:43 Page 57

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 163 164

No comments

Canon ZR50MC Instruction Manual Page 57