Canon ZR50MC Instruction Manual download pdf (Page 99)

Editing

3. Select AUDIO IN or MIC. IN and close the menu.

4. Locate the point where you want to start audio dubbing, then press

the PAUSE button.

• You can use the playback buttons on the body of the camcorder or the special

playback functions on the wireless controller in the same way as in playback

mode.

• The camcorder becomes set to playback pause mode.

5. Press AUDIO DUB.

• AUDIO DUB. and appear on the display.

• If you have the DM-50 microphone (optional) attached,

(Connection) appears in the display.

6. Press the PAUSE button (and start play on the other audio device

if AUDIO IN).

• Audio dubbing starts.

• If MIC. IN, direct your voice into the microphone.

• changes to .

7. When you get to the point where you want to stop dubbing, press

the STOP button (and then stop play on the other audio device if

AUDIO IN).

• Audio dubbing stops and AUDIO DUB. disappears from the display.

• The camcorder returns to stop mode.

• You can also set zero set memory ( 86) at the place you want to stop

audio dubbing, then every time you return to that position, audio dubbing

will cancel.

• If instead of pressing STOP you press PAUSE, the camcorder will return to

the playback pause mode.

Notes:

• You cannot use the DV terminal while adding sound.

• You might want to adjust the audio mix ( 100) when playing back a tape

with added sound.

• There may be a loss of sound quality if you add sound to a tape recorded on a

camcorder other than the ZR50 MC/ZR45 MC.

• After adding sound 3 or more times to the same place on a tape, there may be

some loss in sound quality.

4_ZR50/45MC_E(87-102) 1/9/02 13:31 Page 99

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 163 164

No comments

Canon ZR50MC Instruction Manual Page 99