Canon X300ST User Manual download pdf (Page 43)

ENGLISH

• If the projector is not properly shut down, to protect the lamp, when you attempt to re-start the

projector, the fans will run for a few minutes to cool down. Press POWER again to start the

projector after the fans stop and the POWER indicator light turns orange.

Direct power off

1. The AC power cord can be pulled out during the projector is on. To protect the lamp, wait about 10

minutes before re-starting the projector. When you attempt to re-start the projector, the fans may run

for a few minutes to cool down. In such cases, press POWER again to start the projector after the

fans stop and the POWER indicator light turns orange.

2. To protect the lamp, do not shut down the projector while the POWER indicator light is blinking

green after the lamp lights up.

3. Before shutting down the projector, be sure to close the menu screen. If you shut down the projector

without closing the menu, the setting data of the menu may not be saved.

4. If you shut down the projector while controlling the projector using the network function, the

application software such as e-Control™ may fail. In this case, close the application software first.

After the connection between the projector and the computer re-establishes, initialize the software

again.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 76 77

No comments

Canon X300ST User Manual Page 43