Canon VB-M40B User Manual download pdf (Page 63)

[Server] Setting the Image Server, Audio Server and HTTP Server

5-19

Setting Page

HTTP Server

(1) [Authentication Method]

Set the authentication method used with the HTTP

server to [Basic Authentication] or [Digest

Authentication].

(2) [HTTP Port]

Set the HTTP port number to 80 or in the range of

1024 to 65535.

Normally [80] (factory default setting) is used.

(3) [HTTPS Port]

Set the HTTPS port number to 443 or in the range of

1024 to 65535.

Normally [443] (factory default setting) is used.

(4) [Global Address for the Web Page]

If a fixed global address is assigned to the camera

using the NAT function of the router, set the global

address and port number here. If [IP Address] is

selected, enter the IP address specified in the [IPv4

Address] field. If [Host Name] is selected, the host

name specified in [DNS] under [Network] will be used.

Set the necessary items under [DNS] (p. 5-6).

Caution

Switch line in and microphone in on each setting page

according to the specification of the microphone

(p. 5-18).

Using the wrong input may damage the camera and/or

microphone. Be sure to configure settings correctly.

Important

• The volume, sound quality, etc., may change depending on

the characteristics of the microphone used.

• If [Input Volume] or [Echo Canceller] settings are changed after

setting volume detection, check the detection setting again.

• RM Viewer is needed to when setting [Audio Reception from

Viewer] to [Enable]. No sound will be output from the camera

when using this function with VB-M700/600/40 Viewer since

the viewer does not support transmitting sound.

• Connect a speaker with amplifier to the camera (“Audio

Input/Output Terminals” in the “Installation Guide”).

• If [Enable] is selected under [Echo Canceller], the sound

quality or volume may be affected. Utilize this function as

necessary according to the installation environment and how

the camera is used.

• When sending audio, carefully read the information in

“Important” under “Audio Input/Output Terminals” in the

“Installation Guide.”

• Audio Reception

• Output Volume

Important

• If the setting of [HTTP Port] or [HTTPS Port] is changed, the

camera may become inaccessible from the active web

browser. Check beforehand the precautions in “Important” in

“[Reboot Item] Setting Items Requiring Rebooting” (p. 5-32).

• If [IP Address] is selected under [Global Address for the Web

Page], be sure to set both [IPv4 Address (global address for

the web page)] and [Port Number (global address for the

web page)]. If [Host Name] is selected, also be sure to set

[Host Name] under [DNS] in [Network] on the Setting page.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 158 159

Comments to this Manuals

No comments

Canon VB-M40B User Manual Page 63

Comments to this Manuals