Canon PowerShot S45 User's Guide Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 188
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
25
Preparing the Camera, Basic Functions
You will hear a startup sound and see the startup image when the power comes
on. (To change the startup sound and image, see below and pages 40 and 156.)
The startup image does not appear when the LCD monitor is off or the
terminal is connected to a TV.
Turning on the camera without the startup sound and image
Press and hold the
button, then turn on the power.
Power-saving Function
The camera is equipped with a power-saving function. If [Auto Power Down] is set to
[On], the power goes off according to the following conditions.
Shooting Mode: Powers down approximately three minutes after the last
time a camera control is accessed. The LCD monitor will shut
off approximately three minutes after the last time a camera
control is accessed even if the power-saving function is
turned off.
Replaying Mode: Powers down approximately five minutes after the last time
a camera control is accessed.
Printer Connection Mode:
Powers down approximately five minutes after the last time
a camera control is accessed on the camera or something is
printed on the printer.
PC Connection Mode: Displays a warning message on the computer screen
approximately 5 minutes after a control is last accessed. The
camera will power down if no controls are used after 1
additional minute.
It will not activate when the communication settings are set
to [PTP] (p. 147).
The following are the ways to restore the power.
If the power-saving function is activated while the camera is in Shooting mode,
press the shutter button halfway.
If the power-saving function is activated while the camera is in Replaying mode,
slide the power/replay lever to the right again.
Please note that the camera continues to consume a minimal amount of power
even when the power-saving function shuts it down.
The power-saving function is disabled while a slide show plays on the camera (p. 114).
You can turn off the power-saving function in the [ (Set up)] menu (p. 151).
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 187 188

Comments to this Manuals

No comments